ABENDS
ABEND code index Find name
1. User codes USECD
2. System codes SYSCD
3. Return codes RETCD
4. File status codes STACD
5. SQL codes SQLCD
6. Misc codes/msgs MISCD
7. CICS codes CICSCD
8. IMS codes IMSCD
----------------------------------------------------------------------
USECD - User codes
----------------------------------------------------------------------
U0001 - CHECK FOR WRONG BLOCKSIZE.
U0002 - IMS PROBLEM - CALL OPERATION TO CHECK ON STATUS. IMS CRASHED.
U0016 - IN UCC11 STEP - TRYING TO RESTART NON-RESTARTABLE STEP.
IF JOB HAS STARTED AND HAS SORTWORKS IN THE STEP ABENDING
TRY INCREASING THE SORTWORKS & RESTARTING THE JOB.
U0016 * PROBABLE SORT CAPACITY EXCEEDED. (MAX TO BOT OF JOBLOG)
* IF EXECUTING SORT W/ PARM=MAXSORT AND JOB ABENDS WITH SORTOUXX
DEVICE MIXING PROHIBITED, CHANGE THE SORTOU00 DD DSN'S TO
UNIT=CTAPE AND RESTART. THIS ABEND CAN OCCUR UNTIL DASD
CONVERSION IS COMPLETE, ABOUT THE 1ST OF NOV. 92.
U0016 * BLOCKSIZE ON INPUT FILE SHOULD BE OMITTED.
U0020 - IN UCC11 STEP - DATA SETS USED FOR RESTART DIFFER FROM PRODUCTION
RUN. TRY CANCELLING ABENDED JOB, DEMAND JOB IN ON HOLD, TYPE=
RES, EDIT JCL, SATISFY HOLD REQUIREMENT TO RESTART. FOR I/P
GDG CHANGE, USE BYPGDG: YES FIELD ON RESTART SCREEN.
U0040 - IN UCC11 STEP - INCORRECT STEP RESTARTED, IMPROPER OR
IMCOMPLETE STEP NAME.
U0046 - PROBABLE PSB PROBLEM - READ VS UPDATE - CALL DBA ON CALL.
U0064 - IN THE UCC11 STEP = CMT NOT CORRECT (GDG PROBLEM). THERE IS NO
GDG BASE RECORD OR JOB IS CALLING ON A (0) GENERATION BUT THERE
ARE NO GENERATIONS CATALOGUED.
ALSO CAN BE DEADLOCK, CHECK SQLCODE, TRY RESTARTING.
U0102 - PROBABLE IMS PROBLEM, TRY RESTARTING.
- 10/31/92 U0102 IMSLOGR DD STATEMENT MISSING - WHEN EXECUTING
CICSBTPH. DELETED STEPLIB DD PER KOSKI TO RUN. YOU COULD
SUGGEST THIS TO DEV.
U0109 - CHECK FOR SQL CODE.
U0175 - DEADLOCK / CONTENTION.
U0200 - CHECK SQL CODE IN ABENDED JOB.
U0240 - A message processing application program exceeded the
allowable execution time (set at IMS system definition) in a message
processing region. In the case of a BMP, this abend indicates that the
value specified in "CPUTIME=" has been exceeded.
System Action: A storage dump is taken and the dependent region program
controller is reattached. In the case of a BMP step, the step is
terminated.
Programmer Response: Refer to the TRANSACT macro in IMS/ESA System
Definition Reference.
U0246 - ???
U0261 - INCORRECT PARM IN DL/I CALL.
U0271 - I/O ERROR DETECTED WHILE PURGING BUFFERS DURING CKPOINT OPERATION
U0273 - I/O ERROR DETECTED WHILE REPOSITIONING A GSAM DATASET DURING RESTART.
resolution: TRY BY GIVING OPTION AS COLD=COLD AT THE EXEC STEP.
U0295 - SORT-X PROGRAM LOADED USING WRONG EXECUTE.
U0304 - The caller passed a non-zero value in register 1.
U0311 - A reserved field is not equal to 0 in one of the 20-byte
description elements in the entry table description (ETD).
Register 2 contains the entry index associated with the
description element.
U0312 - The program identified in one of the 20-byte description
elements could not be found. Register 2 contains the entry
index associated with the description element.
U0313 - The entry indexes are not in ascending order. Register 2
contains the entry index that was not in ascending order.
U0314 - A job step attempted to issue an ETCRE macro, but a prior job
step owned space-switch entry tables. (Subsequent job steps
are not permitted to issue PC/AUTH macros.)
U0402 - PROBABLE IMS PROBLEM, TRY RESTARTING.
U0428 - PSB NOT DEFINED AS AN IMS BMP/CONTACT DBA IN MORNING.
U0437 - APPLICATION GROUP NAME OR RESOURCES SPECIFIED ARE NOT VALID
FOR DEPENDENT REGION
Resolution : MAY NEED 'AGN=' PARAMETER, SEE MEMBER '#RACF' in IFP.PROB.RES.DOC.
U0452 - PSB CONTENTION / 2 DB JOBS DEALLOCATING AT SAME TIME.
IF YOU GET MORE THAN 2 U0452 ABENDS, RESTART THE TRANSACTION
(SIGN ON IMS AND /STA TRAN DB????CP) (SAME NAME AS PSB)
U0456 - PSB IS STOPPED, /STA PROG ALL, STARTS ALL STOPPED PSB'S.
SEE 'CMISCOP.UCC7.SCHEDULE(CA7OS) FOR HOW TO DISPLAY IMS INFO.
U0458 - DATABASE IS STOPPED/CONTACT DBA ON CALL, UNLESS B/U'S ARE RUNNING.
U0474 - CANCELLATION OF JOB THROUGH /STOP REGION ABDUMP
U0476 - PSB OR PCB PROBLEM - CALL PROGRAMMER.
U0519 - ??????????
U0522 - JOB TIMED OUT WAITING FOR A TAPE MOUNT.
U0688 - LOST IMS FROM THE MIX, CHECK WITH OPERATIONS ON STATUS.
Resolution : Try by changing the CLASS .
May be the problem with CLASS and IMS Proc combination
( Ex : I0012 , I0010 ......). Change class to 0 ( ZERO ) and try .
U0755 - ???
U0775 - ISOLATION DEADLOCK - CONTENTION TRY RESTARTING 3 OR 4 TIMES,
BEFORE CONTACTING CARDS ON CALL FOR THE JOB.
1 TIME IN 10,000 TOTAL MIX HAS CAUSED THE POOL TO BE FILLED
MORE TIMES THAN NOT A PROGRAM HAS GONE BESERK, NOT CHECKPOINTING
OR NOT CHECKPOINTING ENOUGH. LENGTH OF TIME TO BACK OUT SHOULD
BE A POINTER TO THE PROBLEM JOB.
U0777 - IMS CONTENTION/RESTART JOB LATER.
U0811 - POINTER PROBLEM.
U0844 - DATA BASE IS FULL, NOTIFY DBA.
U0849 - NOT LISTED IN IMS MSG & CODES, BUT A RESTART CAN WORK
- AN 849 ABEND IS CAUSED BY AN ILLEGAL DATASHARE OF A DATABASE.
U0850 - DATA BASE ERROR, NOTIFY DBA.
U0852 - DATABASE POINTERS OUT OF SYNC - CALL DBA ON CALL - TRY RESTART FIRST.
U0918 - ?
U0999 - GENERALLY A RACF ABEND, BUT CHECK FOR OTHER MESSAGES IN OUTPUT.
SG90214P FLAGS A U999, BUT IS ACTUALLY A B37 IN SAS STEP:
SASB#001 EXEC SAS,SORT=300,WORK='999,999',OPTIONS= ETC.
INCREASE SPACE SHOWN BELOW IN WORK PARM.
SASB#001 EXEC SAS,SORT=300,WORK='1500,1500',OPTIONS= ETC.
U0853 - DATA BASE ROOT PROBLEM/ (CC14533P RUNNING)?? TRY RESTARTING.
U1000 - ???
U1002 - : A storage allocation failure occurred during initialization.
The system attempted to allocate storage for the main NPM control blocks,
but insufficient storage was calculated by FNMIN0S0.
U1003 - ???
U1020 - The Fast Path asynchronous task has terminated abnormally,
and this abend is issued to stop the rest of the IMS system.
System Action: IMS terminates abnormally.
Programmer Response: Correct the problem, and rerun the job.
System Operator Response: Contact the IMS system programmer.
U1035 - DCB=DBLKSIZE=___ NOT SPECIFIED ON A DUMMY DD STMT
U1100 - CONTENTION.
U1234 - ???
U1250 - ????
U1302 * ALL RECORDS WERE'NT RETURNED FROM SORT, TRY BIGGER REGION. 4096K O
U1311 - POSSIBLE REGION SIZE ERROR - INCREASE REGION SIZE ON EXEC STATE. 4096K O
U1320 - POSSIBLE REGION SIZE ERROR - INCREASE REGION SIZE ON EXEC STATE. 4096K O
U1807 - CHECK FOR SQL CODE
U2300 - ????????
U2478 - SEVERAL JOBS ABENDED W/THIS 03/20/92, CAUSED BY TRANS PUTTING
- MESSAGE ON QUEUING THAT HAD ONE LINE EOT. CAUSED TEMP STORAGE
- TO FILL; RECOVERY TOKEN KEPT CHANGING. JASON BUTLER HAD TO
- DELETE RECORD OFF QUEUING DATA BASE.
U2486 - TO MANY WAITING PST'S (60 LIMIT) JUST RESTART JOB.
U2860 - POINTER ERROR PER CHUCK WISE (04/15/90). KDF.
U3300 - D/B PROBLEM, IRLM IS FULL, PROBABLY CAUSED BY ANOTHER JOB
RUNNING AND NOT CHECKPOINTING ENOUGH. TRY RESTARTING.
U3300 - (SEA-LAND) JOBNAME FOR THE JOB EXECUTING 'UTILWTOR'IS NOT ON
- THE UTILWTOR TABLE IN PROD.CTLIB.
U3303 - USUALLY DUE TO LOSING A CICS - RESTART THE STEP AFTER REGION UP.
COULD INDICATE A STOPPED DATA BASE PER D. DAVIES.
U3505 - TRYING TO CLOSE A CLOSED FILE OR OPEN AN OPENED FILE.
U3601 - LIBRARY POINTED TO BY IMS DD STATEMENT COUNT NOT BE OPENED
U3602 - BLDL REQUEST FAILED FOR THE SPECIFIED PSB.
U3603 - REQUESTED PSB COULD NOT BE LOADED
U3604 - ERROR WAS DETECTED DURING GSAM INITIALIZATION
U3604 * MISSING DD NAME ON GSAM FILE.
U3610 - THE COUNT FIELD IN THE USERS PARAMETER LIST IS INVALID
U3611 - ADDRESS FOR GSAM,PCB IN USERS PARAMETER LIST INVALID
U3612 - ERROR DETECTED DURING EXTENDED CHECKPOINT CALL PROCESSING
U3613 - ERROR DETECTED DURING USERS CALL TO A GSAM DATABASE
U3614 - ERROR WHILE PURGING GSAM BUFFERS DURING CHECKPOINT PROCESSING
U3620 - ERROR IN RECURSIVE CALL TO CADDRPE DURING EXTENDED RESTART
U3707 * CICS NOT AVAILABLE
U3708 * NO THREADS AVAILABLE
U3710 - BAD INPUT
U3710 * CHECK SPIE AREA;
SPIE 0007 DATA EXCEPTION
SPIE M004 ADDRESS EXCEPTION
SPIE 0001 PSB ERROR, USE WRONG PROC ON SHR/BTCH COMPILE
U3714 - MIRROR TASK ABEND
* ATCH- SYSTEM HUNG SO IT DUMPED PGM, TRY AGAIN
* AXFN- NO PGM GEN FOR PSB, OR USED PROD PSB IN TEST
* 775 - ENQUE FILE FULL
* 828 - INSERTING A DUPLICATE SECONDARY INDEX, DBA CAN FIX
* 844 - DATABASE IS FULL, CALL DBA
* 850 - DATABASE POINTERS ARE BAD, CALL DBA
U3717 * PCB NOT DEFINED IN PSB.
U3718 * NO FUNCTION CODE.
U3723 * REASON=801 PSB NOT IN ACB LIBRARY.
REASON=805 PSB NOT SCHEDULED/ DB NOT AVAILABLE
REASON=828 TRYING TO INSERT DUPLICATE SECONDARY INDEX
REASON=8FF DLI NO ACTIVE.
U3734 * INCREASE REGION
U4015 - BAD GNP CALL (GET NEXT PARENT)
----------------------------------------------------------------------
SYSCD - System codes
----------------------------------------------------------------------
SA14-04 MAY BE CONTENTION - TRY RESTARTING ONCE ACCORDING TO INSTRUCTION
SA78-10 MAY BE CONTENTION - TRY RESTARTING ONCE ACCORDING TO INSTRUCTION.
SA0A * INACTIVE PGM OVERRIDES FREE AREA, AREA TO BE RELEASED OVERLAPS
* A FREE AREA.
* INITIATOR FAILURE.
SB0A * COBOL - CONTROL PASSED BEYOND END OG PGM DUE TO INVALID PERFORM.
SB14 * ERROR ATTEMPTING TO CLOSE A PDS OPENED FOR OUTPUT TO A MEMBER.
* THE STOW ROUTINE, WHICH PLACES THE MEMBER NAME IN THE DIRECTORY
FAILED BECAUSE NO SPACE WAS LEFT IN THE DIRECTORY OR THE NAME
ALREADY EXISTS OR AN INCORRECTABLE I/O ERROR OCCURED.
* AN ATTEMPT IS BEING MADE TO ALLOCATE A PDS AND ADD A MEMBER
FROM AN INVALID COBOL COMPILATION.
SB37 - SPACE - NEED TO INCREASE SPACE ON THE SORTED OUTPUT DATA SET.
* ALSO CAN MEAN IT COULDNT FIND ENOUGH SPACE ON THE VOLUME TO
* ALLOCATE THE 15 EXTENTS OF SECONDARY.
* IF JOB HAS THIS TYPE OF JCL - EXEC SORT,REGION=2M,PARM='CORE=
500K',CYL=50, AND JOB FAILS WITH RC16, INCREASE SORT SIZE BY
IN CYL=XX TO INCREASE THE SORT WORK SIZE. THERE WILL BE NO SORT
WORKS IN THE JCL ITSELF TO INCREASE.
* SOME DM* JOBS ALLOCATE SPACE IN KILOBYTES IE
SPACE=(1,(1500,500)),AVGREC=K
SC03 - USER FILE HAS NOT BEEN CLOSED, NOTIFY DESIGNER.
* FILE STATUS=92 OPENED FILE, DIDNT READ, TRIED TO REWRITE.
SC13 * ERROR DURING OPEN PROCESSING. AN I/O ERR WAS FOUND OR THE SVC
* ROUTINE WAS UNABLE TO LOCATE A CONCATENATED PARTITIONED DATASET.
* THIS COULD BE AN ATTEMPT TO OPEN CONCAT. PDS FOR OUTPUT.
* IT COULD ALSO BE THE FORMAT 1 DSCB COULD NOT BE LOACTED IN THE
* VTOC OF THE DASD REFERENCED.
SC78 - NOT ENOUGH C-POOL AVAIL NOT ENOUGH VIR STORAGE AVAIL.
SD00 * NEEDS LARGER REGION.
SD37 * MORE SPACE NEEDED IN SPACE PARM. THERE WAS NO SECONDARY SPACE
* SPECIFIED.
SE37 - SPACE PROBLEM - IF DSN IS A FOCUS D/S - TRY COMPRESSING THE DSN
THRU 3.1.
* THIS RESULTS WHEN AN OUTPUT PDS FILLS UP ITS SPACE. IT ALSO
* HAPPENS WHEN THE PDS CANT ACQUIRE ITS 15 EXTENTS ON ONE VOLUME.
* A PDS CAN NOT SPAN MORE THAT ONE VOLUME.
SFFF PROBABLE CONTENTION - RESTART JOB
SF13 * A SUPERVISOR CAL (SVC) INSTRUCTION CONTAINED AN INVALID OPERAND
* OR THE SVC INSTRUCTION CALLED WAS NOT INCLUDED IN THE OPERATING
* SYSTEM. THIS OCCURS DURING OPEN PROCESSING. IT COULD BE A PDS
* MEMBER COULD NOT BE FOUND, OR CONFLICTING OR MISSING DCB PARMS.
* INVALID PARMS PASSED TO SUPERVISOR CALL ROUTINE.
SF22 * I/O TIME ESTIMATE EXCEEDED.
SF2D * OVERLAY SUPERVISOR - INVALID SUPERVISOR CALL
* BAD LOAD MODULE, RE-LINKEDIT MODULE.
SF37 * INPUT/OUTPUT ERR IN END-OF- VOLUME PROCESSING OR END-OF-VOLUME
* COULD NOT FIND A REQUIRED DATASET CONTROL BLOCK(DSCB). IT COULD
* BE NO DSCB COULD BE FOUND FOR A CONCATENATED DSN ON DASD, OR
* AN INVALID PARM WAS PASSED TO END-OF-VOLUME SVC (SVC 55). IT
* COULD ALSO BE AN I/O ERROR READING A FORMAT DSCB OR READING
* VOLUME LABEL ON THE SECOND VOLUME.
S001 - I/O ERROR
* WRONG LENGTH RECORD OR PHYSICAL BLOCK
* NO END OF FILE MARKER
* ATTEMPT TO READ RECORD AFTER END-OF-FILE CONDITION FOUND
* HARDWARE ERROR
* TRIED TO WRITE ON AN INPUT FILE
* INCORRECT USE OF BLOCK CONTAINS CLAUSE - COBOL
* SECONDARY SPACE TO SMALL- (LIKE SB37)
* TAPE BEING READ IN WRONG DENSITY
* TRTCH PARM WAS WRONG
* RECFM V IS INCOMPATIBLE WITH TRTCH ET
S001 * IF USING VSAM FILES IT COULD BE ONE OF THE FOLLOWING:
1) NO INVALID KEY CONDITION ON RANDOM PROCESSING.
2) KEY IS WRONG IN THE FD STATEMENT.
S001-1 WRONG RECORD LENGTH OR BLOCKSIZE.
S002 - RECORD LENGTH--ALSO CHECK FOR SQL CODE IN OUTPUT.
S002-OC FILE BLOCKED TOO LARGE, EXCEEDS TRACK CAPACITY.
* WRONG RECFM OR BLOCKSIZE IN JCL
S013 - CONFLICTING OR UNSUPPORTED PARAMETERS IN DCB
* BLOCKING IN PROGRAM=0; MUST HAVE BLOCKSIZE IN JCL.
* FILE LENGTH DIFFERENT THAN DEFINED IN PROGRAM
* MEMBER NAME SPECIFIED IN DD COULD NOT BE FOUND.
* NO BLKSIZE/DCB SPECIFIED FOR A DUMMY DD.
** WHEN EXECUTING IEBGENER WITH SYSUT1 IS DD DUMMY, FOLLOWED BY
SYSUT2 CREATING NEW DS, THE DCB INFORMATION MUST BE IDENTICAL.
* JCL - TRIED TO CREATE A PDS WITHOUT ALLOCATING DIRECTORY BLOCKS
S013-18 CANNOT FIND FILE, MAYBE EXECUTING WRONG PGM.
* CANNOT FIND FILE LARGE, EXCEEDS TRACK CAPACITY
S013-20 BLKSIZE NOT A MULTIPLE OF LRECL OR WRONG DSN.
S013-60 NEED 'FB' IN DCB (RECFM=FB)
S016 - SORT-X PGM; JCL DOES NOT CONTAIN SORT FIELDS
S031 - I/O ERROR UNDER - PHYSICAL DAMAGE TO RECORDING MEDIUM
INDEXED SEQUENTIAL - OUT OF SEQUENCE KEY WHEN LOADING AN
ACCESS (QISAM) ISAM DATA SET
- WRONG LENGTH RECORD OR BLOCK
S03A - INCREASE REGION
S03B - ERROR IN OPEN - DATA SET HAD NOT BEEN CREATED
PROCESS FOR AN - DATA CONTROL BLOCK HAD NOT BEEN CLOSED
INDEXED SEQUENTIAL AFTER DATA SET CREATED
DATA SET - ERROR IN LRECL OR BLKSIZE
S03D - ERROR IN OPEN - INDEXED SEQ ORGANIZATION NOT SPECIFIED
PROCESS FOR AN IN DSORG OF DCB, REQUIRED EVEN IF
INDEXED SEQUENTIAL SPECIFIED IN SOURCE PROGRAM
DIRECT DATA SET - NOT ALL VOL-SER NUMBERS SPECIFIED OR
INCORRECT SEQUENCE
S04E - CONTENTION WITH ANOTHER JOB. - - - WHEN THE JOB IS A DB2 IMAGE
COPY RESTART THE JOB FROM THE TOP ONLY WHEN THE MESSAGE AT THE
BOTTOM OF OUTPUT READS RESOURCES UNAVAILABLE....JOYCE DILVER....
S062 - RETURN CODE EQUAL TO OR GREATER THAN VALUE OF NULL ARGUMENT PRODUCED
S0B0 - I/O ERROR ON SYSTEM JOB QUEUE
S0C1 - OPERATION EXCEPTION
* A MISSING OR MISSPELLED DD.
* DATASET WAS OPEN OR CLOSED WHEN AN INPUT/OUTPUT INSTRUCTION
* WAS ISSUED FOR IT. IT SHOULD HAVE BEEN THE OPPOSITE.
* BAD LOAD MODULE OR OBJECT DECK.
* FORTRAN- MISSING DIMENSION STATEMENT, SAME NAME FOR ARRAY AND A
* SUBROUTINE.
* COBOL- USING SORT VERB, DDNAME WAS NOT SORTOUT WHEN THE GIVING
* OPTION WAS USED.
* COBOL- SUBROUTINE PROG ID WAS THE SAME AS THE ENTRY NAME.
* COBOL- TRIED TO CALL WITHIN COBOL F SORT I/O PROCEDURE.
* COBOL- TRIED TO CALL A SUBROUTINE WHICH COULDNT BE FOUND.
S0C2 - PRIVILEGED OPERATION EXCEPTION
* COBOL- MISSING PERIOD AT END OF PARAGRAPH OR PARAGRAPH NAMES.
* COBOL- MISSING GOBACK AFTER SORT VERB - LOGIC FELL INTO
* INPUT PROCEDURE.
* A MISSING OR MISSPELLED DD.
* DATASET WAS OPEN OR CLOSED WHEN AN INPUT/OUTPUT INSTRUCTION
WAS ISSUED FOR IT. IT SHOULD HAVE BEEN THE OPPOSITE.
S0C4 - PROTECTION EXCEPTION
* INDEXING (SUBSCRIPTING) OUTSIDE THE PGM'S ASSIGNED LIMITS.
* UNITIALIZED INDEX.
* A MISSING OR MISSPELLED DD.
* AN ATTEMPT TO READ AN UNOPEND INPUT FILE.
* BLOCKSIZE AND RECORD SIZE BEING SPECIFIED AS = FOR VARIABLE
LENGTH RECORDS
S0C5 - ADDRESSING EXCEPTION
* INDEXING (SUBSCRIPTING) OUTSIDE THE PGM'S ASSIGNED LIMITS.
* UNITIALIZED INDEX.
* A MISSING OR MISSPELLED DD.
* AN ATTEMPT TO CLOSE A DATASET A SECOND TIME.
* AN INPUT/OUTPUT INSTRUCTION TERMINATED BECAUSE OPEN WAS
UNABLE TO COPLETE THE DCB.
S0C6 - SPECIFICATION EXCEPTION
* AN ADDRESS DOES NOT SPECIFY THE BOUNDARY REQUIRED.
S0C7 - DATA EXCEPTION- DATA WAS OF INCORRECT FORMAT FOR THE INSTRUCTION
ATTEMPTING TO PROCESS IT.
* UNINITIALIZED INDEX OR SUBSCRIPT.
* FIELDS IN DECIMAL ARITHMETIC OVERLAP INCORRECTLY.
* INDEX/SUBSCRIPT VALUE INCORRECT AND INVALID DATA WAS REFERENCED.
* THE DECIMAL MULTIPLICAND HAS TOO MANY HIGH-ORDER SIGNIFICANT
DIGITS.
* DATA FIELD WAS NOT INITIALIZED, BLANKS WERE READ INTO A FIELD
DESIGNED TO BE PROCESSED WITH PACKED DECIMAL INSTRUCTIONS.
S0C8 - FIXED POINT OVERFLOW EXCEPTION
S0C9 - FIXED POINT DIVIDE EXCEPTION. INCREASING REGION TO 0M WORKED
FOR GARY STRAITZ ON A JOB HE WAS RUNNING.
S0CA - DECMIAL OVERFLOW EXCEPTION -
DESTINATION FIELD TOO SMALL FOR RESULT
S0CB - DECIMAL DIVIDE EXCEPTION, QUOTIENT EXCEEDS SPECIFIED DATA FIELD
SIZE.
S0CC - EXPONENT OVERFLOW EXCEPTION
S0CD - EXPONENT UNDERFLOW EXCEPTION
S0CE - SIGNIFICANCE EXCEPTION
S0CF - FLOATION POINT DIVIDE EXCEPTION DIVIDE BY ZERO
S0F1 -
S0F2 -
S0F3 -
S106 - PGM IS IN PGMLIB BUT POINTERS ARE BAD. HAVE PGMR COMPILE IT IN
TESTLIB AND PUT STEPLIB IN JCL TO PULL FROM TESTLIB.
S106 * ERROR WHILE LOADING MODULE INTO MAIN STORAGE/NEEDS MORE CORE
OR ADD REGION PARM TO JOB CARD
S117 -
S122 - OPERATOR CANCEL , REQUESTED DUMP
S137 - I/O ERROR ERROR IN LABEL PROCESSING
* MULTI-VOLUME DATASET WITH INCONSISTENT LABELING.
* NO TRAILER LABELS OR TAPE MARKS EXISTS AT END OF DATA.
* LABEL FORMAT INCORRECT.
S14F * CARD INPUT MISSING
S1E7 * DSN DOES NOT MATCH THE DSN ON THE VOLUME REQUESTED
S213 - DSCB NOT FOUND. I/O ERROR IN READING OR WRITING DSCB
(DSCB=DATA SET CONTROL BLOCK)
* THE FORMAT DSCB COULD NOT BE FOUND ON DASD.
* DISP=OLD OR SHR FOR AN OUTPUT DSN.
* SPACE PARM WAS NOT SPECIFIED.
* DISP=MOD BUT THE DATA SET SHOULD REALLY
BE NEW
* DISP=NEW AND UNIT AFFINITY REQUESTED
(UNIT=AFF=DDNAME) DEFERRED MOUNTING IS
IMPLIED AND NO SPACE IS ALLOCATED.
S214 - TAPE POSITIONING OR INVALID DISP
- HARDWARE DEVICE DIFFICULTIES
- BAD PHYSICAL SPOT ON RECORDING MEDIUM
- NO TAPEMARK FOLLOWING DATA
- DATA OBLITERATION
S222 - OPERATOR CANCELED
S228 - STORAGE VIOLATION - PROGRAM MIGHT HAVE BEEN COMPILED USING WRONG
RMODE, AMODE.
S237 - ERROR AT END OF VOLUME. S237-08 MAY BE CAUSED BY INTERNAL AND
EXTERNAL TAPE LABEL NOT MATCHING, TRY WHATTAPE ON TAPE NUMBERS
PRIOR AND RIGHT AFTER MISMATCHED TAPE.
* BLOCK COUNT WRONG ON TRAILER LABEL.
* VOL=SER SPECIFIED WRONG IN JCL.
* TAPE BLOCK COUNT DIDNT AGREE WITH DCB BLOCK COUNT, POSSIBLE
SKIPPED BLOCK DUE TO HARDWARE ERROR.
S306 - THIS CAN HAPPEN IF A MEMBER GETS REMOVED FROM CICS LOADLIB
SUCH AS CMSSGP.CICS.LOADLIB1 DAVE PADGETT CAN PUT THIS BACK
ON THE APF LIST WITH A RESOLV COMMAND. CAN ALSO BE A RACF ABEND.
(WILL SHOW MODULE XXXXXXXX NOT ACCESSED, USER UNAUTHORIZED.
S314 - I/O ERROR READING DSCB.
S322 - TIME OUT (CPU TIME LIMIT EXCEEDED), TRY ADDING TIME PARM
120 CPU MINUTES IS THE SYSTEM DEFAULT FOR EACH STEP IN A JOB.
S400 - INVALID CONTROL - INVALID DCB PARAMETER BLOCK
S413-08 I/O ERROR, RESTART JOB IN ABENDED STEP.
* THE VOLUME COULDNT BE MOUNTED ON THE REQUESTED DEVICE.
* THE VOLUME SERIAL # INCORRECT.
* THE VOLUME SERIAL # WASNT SPECIFIED FOR AN INPUT DSN
* VOLUME SEQUENCE # SPECIFIED IN CATLG OR JCL WAS GREATER THAN
THE # OF VOLUMES CURRENTLY ALLOCATED TO THE DSN.
S422 - JOB REQUIRED TOO MUCH SPACE IN SYSTEM JOB QUEUE.
S437 - ERROR OCCURRED AT END OF VOLUME
S428 - PSB AND REGION - IF PSB 'T' REGION = I003
INCOMPATIBLE - IF PSB 'P' REGION = I002
S513 - ERROR AT OPEN FOR TAPE DATA SET ON TAPE VOLUME.
* ASSIGNMENT OF TWO DATASETS TO THE SAME TAPE DEVICE.
S522 - TIME OUT (TASKS IN JOB STEP IN WAIT STATE DUE TO UNATTAINABLE
RESOURCE E.G, PHYSICAL DEVICE, DATA SET, CPU)
* PROGRAMMED TIMED OUT WAITING FOR TAPE MOUNT
S606 - NOT ENOUGH MAIN STORAGE WAS AVAILABLE TO LOAD PROGRAM
S60A * NEEDS MORE CORE
S613 - TAPE OR CARTRIDGE POSITION ERROR
* MISSING DCB .
* DENSITY IS WRONG.
* RECFM=F IN JCL WHEN FILE IS ACTUALLY FB
S637 - I/O ERROR DURING END-OF-VOL; SEE SPECIFIC RETURN CODES IN IEC026I BOOK.
* CONCATENATED DSNS HAVE UNLIKE ATTRIBUTES. I BOOK.
S706 - THE REQUESTED LOAD MODULE WAS MARKED BY THE LINKAGE EDITOR
AS NOT EXECUTABLE...
S713 - ERROR DURING OPEN DUE TO EXPIRATION DATE VIOLATION.
S714 - UNCORRECTABLE I/O ERROR OCCURRED IN TAPE LABEL PROCESSING (CRIMP
IN TAPE, TAPE LABEL DESTROYED OR WRITTEN INCORRECTLY).
S722 - TIMEOUT (OUTPUT LIMIT REACHED, JOB EXCEEDED NUMBER OF ALLOWABLE
LINES)
S737 - ERROR DURING END-OF VOLUME OR DURING ALLOCATION OF SECONDARY
DASD SPACE AS REQUESTED IN SPACE PARM OF DD, POSSIBLY NEEDS
MORE SPACE.
* CONCATENATED DSN CANT BE FOUND.
S755 - ENQUE FILE FULL - TOO MANY ENQUES (GET HOLD, ETC.)
S775 - NO THREADS - SYSTEM SHUTTING DOWN -TRY LATER
S80A - ERROR DURING GETMAIN - TRY INCREASING REGION PARM.
4096K OR 7M. 8M IS MAX BUT SHOULD EXERCISE CAUTION IN USING PER
JOHN SHULTZ. 0 USES WHATEVER'S NEEDED, LIKE A 1440 PARM.
S804 * NEEDS LARGER REGION SIZE.
S806 - REQUESTED MODULE NOT FOUND / PROGRAM PROBLEM
* MISSING STEPLIB OR JOBLIB CARD?
* OBJECT PROGRAM NOT FOUND
S813-04 TAPE MOUNTED DOES NOT HAVE DSN THAT THE JCL IS LOOKING FOR
(COULD BE 2 TAPES WITH THE SAME INTERNAL NUMBER)
S822 - REGION UNAVAILABLE (LIKE IN REGION=6M)
- SYSTEM ERROR IN INITIATOR U11STEP (USUALLY IN CHANGE ACCUMS);
REGION UNAVAILABLE, ERROR CODE=20 - TRY RESUBMITTING
S837 - VOLUME COUNT PARM INSUFFICIENT VOL=(,,,10) (LABEL=TAPE,VOL=(,,,99)
CAN SOMEONE EXPLAIN THE LABEL= TAPE PARM?????
S850 USER ABEND ISSUED BY IMS.
DATA BASE POINTER ERROR WHEN READING FROM A REGION NOT THE
UPDATING REGION.
CALL DBA. DATA BASE NEEDS TO BE DEALLOCATED AND REALLOCATED
S678 - NEEDS REGION PARM ADDED ON JOB CARD (REGION=7M)
S878 - VIRTUAL STORAGE REQUESTED NOT AVAILABLE. - TRY INCREASING REGION PARM.
4096K OR 7M. 8M IS MAX BUT SHOULD EXERCISE CAUTION IN USING PER
JOHN SHULTZ. 0 USES WHATEVER'S NEEDED, LIKE A 1440 PARM.
ADD REGION=4096K ON JOB CARD OR STEP.
S90A * TRYING TO CLOSE A CLOSED FILE OR OPEN AN OPENED FILE.
S913-38 ICH408I INSUFFICIENT AUTHORITY RACF
----------------------------------------------------------------------
RETCD - Return codes
----------------------------------------------------------------------
R/C 12 GENERIC ABEND, CHECK OUTPUT FOR SPECIFIC REASON, IE SB37,
CONTENTION.
R/C 12 DO A FIND ON SQL, IF SQLCODE=00000091J THIS IS A DEADLOCK AND
THE JOB SHOULD BE RESTARTED PER THE XT-42 INSTRUCTIONS
IF SQLCODE=00000090M CHECK WITH DATA BASE
ABOUT ENABLE UTILITY AFTER THAT RESTART JOB
PER XT-42
R/C 16 WHEN EXECUTING SYNCSORT,PARM='RC16=ABE' JOB WILL RETURN CODE 16.
MAX TO BOTTOM TO SEE IF ABEND IS EXPLAINED.
* IF JOB HAS THIS TYPE OF JCL - EXEC SORT,REGION=2M,PARM='CORE=
500K',CYL=50, AND JOB FAILS WITH RC16, INCREASE SORT SIZE BY
IN CYL=XX TO INCREASE THE SORT WORK SIZE. THERE WILL BE NO SORT
WORKS IN THE JCL ITSELF TO INCREASE SPACE.
----------------------------------------------------------------------
STACD - File status codes
----------------------------------------------------------------------
I/O STATUS '35' -
DDNAME MISSING (COBOL II).
I/O STATUS '37' -
CHECK FD RECORD LENGTH AGAINST DCB LENGTH (COBOL II).
I/O STATUS '39' -
CHECK BLOCK CONTAINS CLAUSE IN FD (COBOL II).
I/O STATUS '46'
READ PAST END OF DATA ON FILE (COBOL II).
I/O STATUS '47'
READ AFTER FILE CLOSED (COBOL II).
I/O STATUS '48' -
WRITING TO FILE OPENED AS INPUT.
FILE STATUS '92' -
1. ANY I/O REQUEST AGAINST A FILE THAT IS NOT OPEN.
2. ANY I/O REQUEST THAT IS NOT ALLOWED FOR THE OPTION THAT
WAS SPECIFIED WITH THE OPEN STATEMENT. (I.E. READ A FILE
OPENED AS AN OUTPUT OR REWRITE A FILE OPENED AS INPUT).
3. ANY WRITE OR REWRITE OF A RECORD WHOSE LENGTH IS GREATER
THAN THE MAXIMUM SIZE SPECIFIED IN THE FD (DCB).
4. ANY ATTEMPTED ACTION ON A FILE AFTER END-OF-FILE CONDITION
HAS OCCURED.
----------------------------------------------------------------------
SQLCD - SQL return codes
----------------------------------------------------------------------
NOTES:
* IN DB2 RELATED JOBS, DO A FIND ON SQL
SQL 100 - ROW NOT FOUND FOR FETCH--CONTACT PROGRAMMER, RETRY WON'T WORK.
-203 - A REFERENCE TO COLUMN colum-name is AMBIGUOUS
-204 - NAME IS UNDEFINED NANE
-205 - column-name IS NOT A COLUMN OF TABLE table-name
-501 - CURSOR IDENTIFIED IN FETCH OR CLOSE IS NOT OPEN
-502 - CURSOR IDENTIFIED IN OPEN IS ALREADY OPEN
-504 - THE CURSOR NAME cursor-name IS NOT DEFINED
-803 - INSERT/UPDATE VALUES INVALID; CONTACT SYS DEV
-805 - PROGRAM NOT FOUND; PROGRAM NOT BOUND AS PART OK PLAN NAME.
CONTACT SYS DEV.
91J - DEADLOCK, RESTART; LIKE -911.
90M - STOPPED UTILITY, UTILITY IS ACTIVE; CK. IF IMAGE COPIES ARE
RUNNING. RESTART AFTER IMAGE COPIES COMPLETE.
-904 - DB2-TABLE IS DOWN CONTACT SYSTEM DEV. (RESOURCE UNAVAILABLE)
OR CAN BE A TEMPORARY CONTENTION - RESTART LATER.
-911 - RESOURCE CONTENTION, RESTART AFTER JOB CAUSING CONTENTION ENDS
-913 - RESOURCE CONTENTION, RESTART AFTER JOB CAUSING CONTENTION ENDS
-04E - DATA PROBLEM OR DB2 INTERNAL ERROR
-818 - BIND PROBLEM, RELATED TO PRODUCTION UPDATES.
-923 - DB2 CONNECTION DOWN, CHECK STATUS OF DB2 PRODUCTION
-924 - DB2 CONNECTION INTERNAL ERROR = OPERATIONS CHECK SUBSYS DB2
CAF ERROR: DB2 CONNECTION LIMIT HAS BEEN REACHED = TOO MUCH RUNNING
IN DB2; RESTART AFTER ANOTHER DB2 JOB ENDS
----------------------------------------------------------------------
MISC - Miscellaneous codes and messages
----------------------------------------------------------------------
PATTERN DSCB NOT FOUND IN VTOC -IF GDG WITH DISP=NEW,CATLG,DELETE,
GDGMODEL MUST BE INCLUDED IN DCB= SUCH AS DCB=(GDGMODEL,RECFM=FB,ETC.
NO PRIMARY VOLUME AVAILABLE MSG - NO VOLUME'S AVAILABLE WITH ENOUGH
SPACE FOR RECALL.
NO STORAGE VOL - VOL=PRIV ASSUMED - UNABLE TO ALLOCATE -- CHECK JCL FOR
(SPGGRP,9); SPGGRP (OR OTHER ESOTERIC) MAY HAVE DECREASED NUMBER OF
VOLUMES. SPGGRP HAD BEEN DECREASED TO 8 CAUSING THIS JCLERR.
ALLOCATION FAILED DUE TO DATA FACILITY SYSTEM ERROR
IGD17273I ALLOCATION HAS FAILED FOR ALL VOLUMES SELECTED FOR DATA SET ..NAME
IGD17277I THERE ARE (XX) CANDIDATE VOLUMES OF WHICH XX ARE ENABLED OR QUIESCED..
THIS IS BASICALLY THE SAME AS SPACE REQUESTED NOT AVAILABLE. TRY
DECREASING SPACE ALLOCATION PER GENE WILL 02/10/91, AND LET JONES & CO
KNOW OF THIS SORT OF ABEND DURING WORK HOURS UNLESS UNABLE TO RESOLVE.
**UPDATE 06/15/91 - TO DD STATEMENT ADD STORCLAS=NONSMS, IE
UNIT=SYSDA,STORCLAS=NONSMS,SPACE=(ETC), THEN CHANGE/ADD USER=TTSVDMP,
PASSWORD=???????? TO JOB CARD TO RESTART PER JOHN SHULTZ.
01/11/92 - CHANGING TO UNIT=(SPGGRP,3) CAN WORK. KDF
03/21/92 - OR ADDING MORE SORTWORKS. KDF
----------------------------------------------------------------------
CICSCD - CICS abend codes
----------------------------------------------------------------------
ADCA - PSB MAY NOT BE IN SYNC WITH THE SOURCE PROGRAM
CHECK THAT THE DATABASE BEING CALLED IS REF-
ERENCED IN THE PSB.
AUEP - TIMEOUT. WHEN A PROGRAM READS A LOT OF DATA,
IT REACHES THE THRESHOLD LIMIT AND
ABENDS.
ADCC - HAVE SYSTEMS MANAGEMENT RECYCLE DBCTL IN THE
REGION THAT THE ABEND IS OCCURRING. IF THIS
FAILS THEN CALL TECH SUPPORT
ADLA - POSSIBLY DATABASE FULL, CALL DBA.
THIS IS A GENERAL IMS FILE REGION ABEND CODE.
PROGRAMMER CAN PULL DUMP USING CICS TRANS SP31
WHERE TASK=CSM5 / ABEND=ADLA / REGION=FILE REGION
REGISTER 1 WILL CONTAIN IMS ABEND CODE (IN HEX).
CORRESPONDING CICS AZI6 DUMP WILL TELL WHICH DATA BASE.
ADLC - PROGRAM TRIED TO ACCESS A DATABASE THAT IS
DISABLED.
ADLF - DL/I CALL MADE FOR A DATABASE, BUT THE LINK TO
THE SYSTEM ON WHICH IT RESIDES IS DOWN,
CALL DBA.
ADLG - ERRORS IN THE DL/I ARGUMENT LIST.
(VERIFY PCB IS SCHEDULED)
AEIP - CICS INVREQ CONDITION - IF USING LOGICAL PAGING
CHECK TO SEE IF A MAP W/O PAGING WAS SENT AFTER
ACCUM PAGING INITIATED.
AEIV - LENGERR - INVALID LENGTH ON SEND, RECEIVE, AND
OTHER VERBS
AEXT - DB2 NOT COMPILED WITH DL/I OPTION TURNED ON
AEY9 - DB2 HAS COME DOWN AND BACK UP BUT HAS NOT BEEN
RE-ATTACHED. TRY ATTACHING BY CODING:
IN CICS4 - "DSNC STRT 5"
AKCS - DEADLOCK TIMEOUT.
AICA - RUNAWAY TASK CONDITION, POSSIBLE LOOP.
APCT - REQUESTED MODULE CANNOT BE LOCATED IN THE PPT
OR ENTRY DISABLED (MODULE NOT FOUND IN THE
LOAD LIBRARY).
ASRA - USUALLY DATA EXCEPTION ERROR.
ATNI - CICS DECIDES IT NEEDS TO ABEND THE TRANSACTION.
COULD BE: INCORRECT DEFINITION IN TCT.
INVALID DATA STREAM FOR DEVICE TYPE.
AZI2 - TOO MANY DATABASE CALLS, NOT TAKING CHECKPOINT
(CHECK TO SEE IF IN LOOP WITH DL/I CALLS).
AZI4 - INTERREGION COMMUNICATION REQUEST CAN NOT BE
COMPLETED BECAUSE THE OTHER SYSTEM HAS BECOME
UNAVAILABLE.
AZI6 - TIME OUT, PROGRAM MAY BE IN A LOOP.
ISRT WITH SECONDARY INDEX THAT EXISTS RATHER
THAN AN 'II' STATUS CODE.
DATA BASE POINTER PROBLEM - INTER-REGION
READ. RELATED TO BUFFERS.
THIS IS A GENERAL ABEND CODE, OFTEN ACCOMPANIED
BY AN ADLA ABEND FOR THE FILE REGION (SEE ADLA).
1009 - COBOL 2 ABEND - WORKING STORAGE TOO LARGE, COB2
ALLOWS FOR VERY LARGE WS BUT CICS STILL LIMITS
AT 64K.
1011 - COBOL 2 ABEND - INDICATES USE OF ACCEPT,
DISPLAY, ETC. INVALID VERB.
APLC - SHARED LIBRARY FACILITIES ARE REQUIRED BY THE
PROGRAM, BUT WERE NOT INCLUDED IN THE CICS
SYSTEM DURING INITIALIZATION/INSTALLATION.
APLD - ERROR DURING TRANSMISSION OF A RECORD TO THE
CPLD QUEUE.
APLE - ERROR DURING PL1 PROGRAM MANAGEMENT (EQUAL TO
4000 NON CICS ABEND)
APLG - A GET STORAGE REQUEST TO THE STORAGE ALLOCATION
ROUTINE SPECIFIED A SIZE > THAN CICS/OS/VS
PERMITTED MAX (65,496) EITHER A BASED OR
CONTROLLED VARIABLE THAT IS TOO LARGE IN AN
ALLOCATE STMT, TOO MANY LARGE 'AUTOMATIC
VARIALBES.
APLI - ERROR DURING TRANSMISSION OF A RECORD TO THE
CPLI QUEUE.
APLM - NO MAIN PROCEDURE
APLS - TERMINATION IS CAUSED BY THE 'ERROR' CONDITION,
AND THE 'ERROR' CONDITION WAS NOT CAUSED BY
AN ABEND (OTHER THAN AN ASRA ABEND).
APLX - TOTAL POSSIBLE 'LIFO' STORAGE SEGMENTS HAVE
BEEN EXHAUSTED. CHECK PROGRAM FOR LOOPS OR
INCREASE THE 'ISASIZE' OR 'ISAINC'.
----------------------------------------------------------------------
IMSCD - IMS abend codes
----------------------------------------------------------------------
COMMOM ABENDS/REASONS
ABEND REASON
----- ------------------------------------------
S000 -
- 0260 TRYING TO CHKP WITHOUT PRIOR XRST
- 0261 PSB OUT OF SYNC WITH PROGRAM - NOT ENOUGH
GSAMS DEFINED IN PSB.
(IN I004BMP OR I003BMP MAKE SURE PROGRAM
IS COMPILED AS SHRBATCH NOT BATCH)
- 0428 PSB NEEDS TO BE DEFINED IN THE IMS REGION
- 0437 RACF ABEND ON A MESSAGE QUEUEING PROGRAM USING
A PSB NAME THAT MATCHES THE PROGRAM NAME.
(JCL MUST CONTAIN "AGN=AGPAMS4" ON THE EXEC CARD)
- 0456 PSB NEEDS TO BE RESTARTED AFTER PRIOR ABEND
OR PSB NOT FOUND
(FOR TEST CHECK DB15563P FOR TEST PSB JOB
THAT SHOULD RUN AT 10, 12, 2 AND 4)
- 0474 OPERATOR CANCEL
- 0476 PSB ERROR
- PROGRAM NOT COMPILED AS SHRBATCH
- REFERING TO -SC NOT -PCB IN CALL
- 0688 CTL PROGRAM NOT ACTIVE; CHECK IF EXECUTING
WRONG IMS (EX, I002BMP IN CLASS J)
- 0805 PSB NOT SCHEDULED/A DATA BASE IS NOT AVAILABLE
- 0811 BAD DATA BASE POINTERS - CONTACT DBA
- 0844 DATA BASE IS FULL
- 0849 CALL WITH 'GO' ON SEGMENT THAT HAS BEEN
PREVIOUSLY RETRIEVED BUT NOT COMMITED.
DATA INTEGRITY NOT INSURED.
- 0850 INTER-REGION DATA BASE BUFFER PROBLEM
- 3303 SIMILAR TO 0805.
DATA BASE OFFLINE IN IMS - DATA SHARING
DATA BASE MAY STILL BE AVAILABLE IN ONLINE
REGION.
3042 - RUNNING INVALID PROC IN JCL
(EXAMPLE TRYING TO EXECUTE DB2 IN PROC
THAT DOES NOT SUPPORT IT OR TRYING TO
EXECUTE BMP PROC FOR DB2)
3601 - LIB POINTED TO BY IMS DD COULD NOT OPEN
3602 - BLDL REQUEST FAILED FOR PSB
3603 - REQUESTED PSB COULD NOT BE LOADED
3604 - MISSING DDNAME ON GSAM FILE
3610 - LOOK AT YOUR RESTART
3611 - GSAM PSB IN USER LIST INVALID
3612 - ERROR DURING EXTENDED CHKPT CALL
3613 - ERROR DURING USER CALL TO GSAM DATABASE
3614 - ERROR DURING PURGING GSAM BUFFERS AT CHKPT
3620 - ERROR IN A RECURSIVE CALL TO CADDRPE
DURING EXTENDED RESTART
3707 - CICSXXX NOT AVAILABLE
CLASS NOT = J FOR TEST SHARE BATCH
CLASS NOT = K FOR PROD SHARE BATCH
- 0101 SAVEAREA TOO SMALL
- 0102 NO RESTART RECORD - DELETE CC505
3710 - ABEND WITH USER CODE, CHECK SPIE AREA
- 0001 PSB ERROR; WRONG PROC OR COMPILE
- 0004 ADDRESS EXCEPTION
- 0007 DATA EXCEPTION
3711 - CICS NOT UP
'KILLER' PROGRAM - NEED MORE CHKPTS
3714 - AXFN NO PROGRAM GEN OR TEST PSB
- ADLF CICS FILE REGION IS DOWN
- DFH2 POSSIBLE CHKPT QUEUE CONTENTION
- 775 ENQUE FILE FULL
- 828 INSERTING DUPLICATE SECONDARY INDEX
- ADLA/844 DATABASE FULL, CHECK SECONDARY INDEX
- 850 BAD DATA BASE POINTERS
- 852 BAD DATA BASE POINTERS
- 853 INDEX POINTER PROBLEM
- 913 INSUFFICIENT ACCESS
3717 - PCB NOT DEFINED IN PSB OR INVALID DLI
ARGUMENT LIST. CHECK 'LANG' PARM IN JCL
CHECK LANGUAGE PARAMETER IN CICS SHARED
BATCH PROC. REMEMBER DEFAULT IS PL/1.
3723 - 801 PSB NOT IN TABLES
- 803 PSB ALREADY SCHEDULED
- 805 PSB NOT IN ACBLIB OR DATA BASE OFFLINE
- 806 PROGRAM NOT IN TEST LOAD LIB. CHECK 'MBR='
AND RECOMPILE.
- 828 INSERTING DUPLICATE SECONDARY INDEX.
4036 - INVALID LANG PARM IN JCL - PROGRAM IS PL/I,
LANG PARM IS 'C'.
S322 - EXCEEDS TIME PARAMETER
S522 - OPERATOR DID NOT MOUNT TAPE ON TIME.
S722 - OUTLIM EXCEEDED
S878 - NEED TO INCREASE CORE.
S1320 - BLOW UP TAKING CHKPT, NEED MORE REGION
U0102 - RESTART FAILED BECAUSE IMS CANNOT FIND
RESTART INFO ASSOCIATED WITH CHECKPOINT ID.
CHECK FOR LOW-VALUES IN RESTART RECORD.
U0437 - APPLICATION GROUP NAME OR RESOURCES
SPECIFIED ARE NOT VALID
FOR DEPENDENT REGION
* MAY NEED 'AGN=' PARAMETER,
SEE MEMBER '#RACF'.
U0456 - PSB NEEDS TO BE RESTARTED - SCHEDULING
FOR TEST PSBS RUNNING IN IMS3 (USING PROC
I003BMP OR I003DB2), GET INTO DBAE IN TSO,
USE OPTION STARTPSB.
OR
PSB NOT NEW COPIED IN IMS
(FOR TEST CHECK DB15563P FOR TEST PSB JOB
THAT SHOULD RUN AT 10, 12, 2 AND 4)
U0688 - RUNNING 2 REGIONS IN 1 JOB.
U1904 - CHKPT UTILITY RECORD NOT CREATED
0C4 One of the following exceptions occurred:
4 Protection exception. The key of the storage area
that the running program tries to access is
different than that of the running program. The key
of the running program can be obtained from the PSW
key field. The key of the storage can be obtained
using the IPCS LIST subcommand. The programmer
should determine whether the program is running
with correct the key or whether the storage address
is set up correctly.
10 Segment-translation exception. This error can be
caused by either the segment table being paged out
with the program running disabled or the segment
table entry indicates that all of the storage
referenced by the entry is not allocated. If the
program is running disabled, the programmer should
determine whether the storage should be page fixed
prior to running disabled or whether the storage
address is set up correctly.
11 Page-translation exception. This error can be
caused by either the page table entry being paged
out with the program running disabled or the
referred storage area is not allocated. If the
program is running disabled, the programmer should
determine whether the storage should be page fixed
prior to running disabled, whether the storage area
is still obtained through a GETMAIN or whether the
storage address is set up correctly.
0C5 Addressing exception. The reason code is 5.
0C6 Specification exception. The reason code is 6.
0C7 Data exception. The reason code is 7.
0C8 Fixed-point-overflow exception. The reason code is 8.
0C9 Fixed-point-divide exception. The reason code is 9.
0CA Decimal-overflow exception. The reason code is A.
0CB Decimal-divide exception. The reason code is B.
0CC Exponent-overflow exception. The reason code is C.
0CD Exponent-underflow exception. The reason code is D.
0CE Significance exception. The reason code is E.
0CF Floating-point-divide exception. The reason code is F.
Source: Supervisor control
System Action: The system abnormally ends the task, unless a recovery
routine was provided to handle the interruption. The hardware action
is given in Principles of Operation.
System Programmer Response: Determine whether the problem program or
control program was in error.
If the problem program contained an error, correct it, and run the job
step again.
Note : In the jcl QMFBATCH one parameter i,e., DB2 cpu parameter is to be
supplied immediately after job card.
//jobparm sysaff=sysi
DB23 not operational :
Note : In the jcl QMFBATCH one parameter i,e., DB2 cpu parameter is to be
supplied immediately after job card.
//jobparm sysaff=sysi
sysi - production db2 cpu
sysg - test db2 cpu
____________________________
1. User codes USECD
2. System codes SYSCD
3. Return codes RETCD
4. File status codes STACD
5. SQL codes SQLCD
6. Misc codes/msgs MISCD
7. CICS codes CICSCD
8. IMS codes IMSCD
----------------------------------------------------------------------
USECD - User codes
----------------------------------------------------------------------
U0001 - CHECK FOR WRONG BLOCKSIZE.
U0002 - IMS PROBLEM - CALL OPERATION TO CHECK ON STATUS. IMS CRASHED.
U0016 - IN UCC11 STEP - TRYING TO RESTART NON-RESTARTABLE STEP.
IF JOB HAS STARTED AND HAS SORTWORKS IN THE STEP ABENDING
TRY INCREASING THE SORTWORKS & RESTARTING THE JOB.
U0016 * PROBABLE SORT CAPACITY EXCEEDED. (MAX TO BOT OF JOBLOG)
* IF EXECUTING SORT W/ PARM=MAXSORT AND JOB ABENDS WITH SORTOUXX
DEVICE MIXING PROHIBITED, CHANGE THE SORTOU00 DD DSN'S TO
UNIT=CTAPE AND RESTART. THIS ABEND CAN OCCUR UNTIL DASD
CONVERSION IS COMPLETE, ABOUT THE 1ST OF NOV. 92.
U0016 * BLOCKSIZE ON INPUT FILE SHOULD BE OMITTED.
U0020 - IN UCC11 STEP - DATA SETS USED FOR RESTART DIFFER FROM PRODUCTION
RUN. TRY CANCELLING ABENDED JOB, DEMAND JOB IN ON HOLD, TYPE=
RES, EDIT JCL, SATISFY HOLD REQUIREMENT TO RESTART. FOR I/P
GDG CHANGE, USE BYPGDG: YES FIELD ON RESTART SCREEN.
U0040 - IN UCC11 STEP - INCORRECT STEP RESTARTED, IMPROPER OR
IMCOMPLETE STEP NAME.
U0046 - PROBABLE PSB PROBLEM - READ VS UPDATE - CALL DBA ON CALL.
U0064 - IN THE UCC11 STEP = CMT NOT CORRECT (GDG PROBLEM). THERE IS NO
GDG BASE RECORD OR JOB IS CALLING ON A (0) GENERATION BUT THERE
ARE NO GENERATIONS CATALOGUED.
ALSO CAN BE DEADLOCK, CHECK SQLCODE, TRY RESTARTING.
U0102 - PROBABLE IMS PROBLEM, TRY RESTARTING.
- 10/31/92 U0102 IMSLOGR DD STATEMENT MISSING - WHEN EXECUTING
CICSBTPH. DELETED STEPLIB DD PER KOSKI TO RUN. YOU COULD
SUGGEST THIS TO DEV.
U0109 - CHECK FOR SQL CODE.
U0175 - DEADLOCK / CONTENTION.
U0200 - CHECK SQL CODE IN ABENDED JOB.
U0240 - A message processing application program exceeded the
allowable execution time (set at IMS system definition) in a message
processing region. In the case of a BMP, this abend indicates that the
value specified in "CPUTIME=" has been exceeded.
System Action: A storage dump is taken and the dependent region program
controller is reattached. In the case of a BMP step, the step is
terminated.
Programmer Response: Refer to the TRANSACT macro in IMS/ESA System
Definition Reference.
U0246 - ???
U0261 - INCORRECT PARM IN DL/I CALL.
U0271 - I/O ERROR DETECTED WHILE PURGING BUFFERS DURING CKPOINT OPERATION
U0273 - I/O ERROR DETECTED WHILE REPOSITIONING A GSAM DATASET DURING RESTART.
resolution: TRY BY GIVING OPTION AS COLD=COLD AT THE EXEC STEP.
U0295 - SORT-X PROGRAM LOADED USING WRONG EXECUTE.
U0304 - The caller passed a non-zero value in register 1.
U0311 - A reserved field is not equal to 0 in one of the 20-byte
description elements in the entry table description (ETD).
Register 2 contains the entry index associated with the
description element.
U0312 - The program identified in one of the 20-byte description
elements could not be found. Register 2 contains the entry
index associated with the description element.
U0313 - The entry indexes are not in ascending order. Register 2
contains the entry index that was not in ascending order.
U0314 - A job step attempted to issue an ETCRE macro, but a prior job
step owned space-switch entry tables. (Subsequent job steps
are not permitted to issue PC/AUTH macros.)
U0402 - PROBABLE IMS PROBLEM, TRY RESTARTING.
U0428 - PSB NOT DEFINED AS AN IMS BMP/CONTACT DBA IN MORNING.
U0437 - APPLICATION GROUP NAME OR RESOURCES SPECIFIED ARE NOT VALID
FOR DEPENDENT REGION
Resolution : MAY NEED 'AGN=' PARAMETER, SEE MEMBER '#RACF' in IFP.PROB.RES.DOC.
U0452 - PSB CONTENTION / 2 DB JOBS DEALLOCATING AT SAME TIME.
IF YOU GET MORE THAN 2 U0452 ABENDS, RESTART THE TRANSACTION
(SIGN ON IMS AND /STA TRAN DB????CP) (SAME NAME AS PSB)
U0456 - PSB IS STOPPED, /STA PROG ALL, STARTS ALL STOPPED PSB'S.
SEE 'CMISCOP.UCC7.SCHEDULE(CA7OS) FOR HOW TO DISPLAY IMS INFO.
U0458 - DATABASE IS STOPPED/CONTACT DBA ON CALL, UNLESS B/U'S ARE RUNNING.
U0474 - CANCELLATION OF JOB THROUGH /STOP REGION ABDUMP
U0476 - PSB OR PCB PROBLEM - CALL PROGRAMMER.
U0519 - ??????????
U0522 - JOB TIMED OUT WAITING FOR A TAPE MOUNT.
U0688 - LOST IMS FROM THE MIX, CHECK WITH OPERATIONS ON STATUS.
Resolution : Try by changing the CLASS .
May be the problem with CLASS and IMS Proc combination
( Ex : I0012 , I0010 ......). Change class to 0 ( ZERO ) and try .
U0755 - ???
U0775 - ISOLATION DEADLOCK - CONTENTION TRY RESTARTING 3 OR 4 TIMES,
BEFORE CONTACTING CARDS ON CALL FOR THE JOB.
1 TIME IN 10,000 TOTAL MIX HAS CAUSED THE POOL TO BE FILLED
MORE TIMES THAN NOT A PROGRAM HAS GONE BESERK, NOT CHECKPOINTING
OR NOT CHECKPOINTING ENOUGH. LENGTH OF TIME TO BACK OUT SHOULD
BE A POINTER TO THE PROBLEM JOB.
U0777 - IMS CONTENTION/RESTART JOB LATER.
U0811 - POINTER PROBLEM.
U0844 - DATA BASE IS FULL, NOTIFY DBA.
U0849 - NOT LISTED IN IMS MSG & CODES, BUT A RESTART CAN WORK
- AN 849 ABEND IS CAUSED BY AN ILLEGAL DATASHARE OF A DATABASE.
U0850 - DATA BASE ERROR, NOTIFY DBA.
U0852 - DATABASE POINTERS OUT OF SYNC - CALL DBA ON CALL - TRY RESTART FIRST.
U0918 - ?
U0999 - GENERALLY A RACF ABEND, BUT CHECK FOR OTHER MESSAGES IN OUTPUT.
SG90214P FLAGS A U999, BUT IS ACTUALLY A B37 IN SAS STEP:
SASB#001 EXEC SAS,SORT=300,WORK='999,999',OPTIONS= ETC.
INCREASE SPACE SHOWN BELOW IN WORK PARM.
SASB#001 EXEC SAS,SORT=300,WORK='1500,1500',OPTIONS= ETC.
U0853 - DATA BASE ROOT PROBLEM/ (CC14533P RUNNING)?? TRY RESTARTING.
U1000 - ???
U1002 - : A storage allocation failure occurred during initialization.
The system attempted to allocate storage for the main NPM control blocks,
but insufficient storage was calculated by FNMIN0S0.
U1003 - ???
U1020 - The Fast Path asynchronous task has terminated abnormally,
and this abend is issued to stop the rest of the IMS system.
System Action: IMS terminates abnormally.
Programmer Response: Correct the problem, and rerun the job.
System Operator Response: Contact the IMS system programmer.
U1035 - DCB=DBLKSIZE=___ NOT SPECIFIED ON A DUMMY DD STMT
U1100 - CONTENTION.
U1234 - ???
U1250 - ????
U1302 * ALL RECORDS WERE'NT RETURNED FROM SORT, TRY BIGGER REGION. 4096K O
U1311 - POSSIBLE REGION SIZE ERROR - INCREASE REGION SIZE ON EXEC STATE. 4096K O
U1320 - POSSIBLE REGION SIZE ERROR - INCREASE REGION SIZE ON EXEC STATE. 4096K O
U1807 - CHECK FOR SQL CODE
U2300 - ????????
U2478 - SEVERAL JOBS ABENDED W/THIS 03/20/92, CAUSED BY TRANS PUTTING
- MESSAGE ON QUEUING THAT HAD ONE LINE EOT. CAUSED TEMP STORAGE
- TO FILL; RECOVERY TOKEN KEPT CHANGING. JASON BUTLER HAD TO
- DELETE RECORD OFF QUEUING DATA BASE.
U2486 - TO MANY WAITING PST'S (60 LIMIT) JUST RESTART JOB.
U2860 - POINTER ERROR PER CHUCK WISE (04/15/90). KDF.
U3300 - D/B PROBLEM, IRLM IS FULL, PROBABLY CAUSED BY ANOTHER JOB
RUNNING AND NOT CHECKPOINTING ENOUGH. TRY RESTARTING.
U3300 - (SEA-LAND) JOBNAME FOR THE JOB EXECUTING 'UTILWTOR'IS NOT ON
- THE UTILWTOR TABLE IN PROD.CTLIB.
U3303 - USUALLY DUE TO LOSING A CICS - RESTART THE STEP AFTER REGION UP.
COULD INDICATE A STOPPED DATA BASE PER D. DAVIES.
U3505 - TRYING TO CLOSE A CLOSED FILE OR OPEN AN OPENED FILE.
U3601 - LIBRARY POINTED TO BY IMS DD STATEMENT COUNT NOT BE OPENED
U3602 - BLDL REQUEST FAILED FOR THE SPECIFIED PSB.
U3603 - REQUESTED PSB COULD NOT BE LOADED
U3604 - ERROR WAS DETECTED DURING GSAM INITIALIZATION
U3604 * MISSING DD NAME ON GSAM FILE.
U3610 - THE COUNT FIELD IN THE USERS PARAMETER LIST IS INVALID
U3611 - ADDRESS FOR GSAM,PCB IN USERS PARAMETER LIST INVALID
U3612 - ERROR DETECTED DURING EXTENDED CHECKPOINT CALL PROCESSING
U3613 - ERROR DETECTED DURING USERS CALL TO A GSAM DATABASE
U3614 - ERROR WHILE PURGING GSAM BUFFERS DURING CHECKPOINT PROCESSING
U3620 - ERROR IN RECURSIVE CALL TO CADDRPE DURING EXTENDED RESTART
U3707 * CICS NOT AVAILABLE
U3708 * NO THREADS AVAILABLE
U3710 - BAD INPUT
U3710 * CHECK SPIE AREA;
SPIE 0007 DATA EXCEPTION
SPIE M004 ADDRESS EXCEPTION
SPIE 0001 PSB ERROR, USE WRONG PROC ON SHR/BTCH COMPILE
U3714 - MIRROR TASK ABEND
* ATCH- SYSTEM HUNG SO IT DUMPED PGM, TRY AGAIN
* AXFN- NO PGM GEN FOR PSB, OR USED PROD PSB IN TEST
* 775 - ENQUE FILE FULL
* 828 - INSERTING A DUPLICATE SECONDARY INDEX, DBA CAN FIX
* 844 - DATABASE IS FULL, CALL DBA
* 850 - DATABASE POINTERS ARE BAD, CALL DBA
U3717 * PCB NOT DEFINED IN PSB.
U3718 * NO FUNCTION CODE.
U3723 * REASON=801 PSB NOT IN ACB LIBRARY.
REASON=805 PSB NOT SCHEDULED/ DB NOT AVAILABLE
REASON=828 TRYING TO INSERT DUPLICATE SECONDARY INDEX
REASON=8FF DLI NO ACTIVE.
U3734 * INCREASE REGION
U4015 - BAD GNP CALL (GET NEXT PARENT)
----------------------------------------------------------------------
SYSCD - System codes
----------------------------------------------------------------------
SA14-04 MAY BE CONTENTION - TRY RESTARTING ONCE ACCORDING TO INSTRUCTION
SA78-10 MAY BE CONTENTION - TRY RESTARTING ONCE ACCORDING TO INSTRUCTION.
SA0A * INACTIVE PGM OVERRIDES FREE AREA, AREA TO BE RELEASED OVERLAPS
* A FREE AREA.
* INITIATOR FAILURE.
SB0A * COBOL - CONTROL PASSED BEYOND END OG PGM DUE TO INVALID PERFORM.
SB14 * ERROR ATTEMPTING TO CLOSE A PDS OPENED FOR OUTPUT TO A MEMBER.
* THE STOW ROUTINE, WHICH PLACES THE MEMBER NAME IN THE DIRECTORY
FAILED BECAUSE NO SPACE WAS LEFT IN THE DIRECTORY OR THE NAME
ALREADY EXISTS OR AN INCORRECTABLE I/O ERROR OCCURED.
* AN ATTEMPT IS BEING MADE TO ALLOCATE A PDS AND ADD A MEMBER
FROM AN INVALID COBOL COMPILATION.
SB37 - SPACE - NEED TO INCREASE SPACE ON THE SORTED OUTPUT DATA SET.
* ALSO CAN MEAN IT COULDNT FIND ENOUGH SPACE ON THE VOLUME TO
* ALLOCATE THE 15 EXTENTS OF SECONDARY.
* IF JOB HAS THIS TYPE OF JCL - EXEC SORT,REGION=2M,PARM='CORE=
500K',CYL=50, AND JOB FAILS WITH RC16, INCREASE SORT SIZE BY
IN CYL=XX TO INCREASE THE SORT WORK SIZE. THERE WILL BE NO SORT
WORKS IN THE JCL ITSELF TO INCREASE.
* SOME DM* JOBS ALLOCATE SPACE IN KILOBYTES IE
SPACE=(1,(1500,500)),AVGREC=K
SC03 - USER FILE HAS NOT BEEN CLOSED, NOTIFY DESIGNER.
* FILE STATUS=92 OPENED FILE, DIDNT READ, TRIED TO REWRITE.
SC13 * ERROR DURING OPEN PROCESSING. AN I/O ERR WAS FOUND OR THE SVC
* ROUTINE WAS UNABLE TO LOCATE A CONCATENATED PARTITIONED DATASET.
* THIS COULD BE AN ATTEMPT TO OPEN CONCAT. PDS FOR OUTPUT.
* IT COULD ALSO BE THE FORMAT 1 DSCB COULD NOT BE LOACTED IN THE
* VTOC OF THE DASD REFERENCED.
SC78 - NOT ENOUGH C-POOL AVAIL NOT ENOUGH VIR STORAGE AVAIL.
SD00 * NEEDS LARGER REGION.
SD37 * MORE SPACE NEEDED IN SPACE PARM. THERE WAS NO SECONDARY SPACE
* SPECIFIED.
SE37 - SPACE PROBLEM - IF DSN IS A FOCUS D/S - TRY COMPRESSING THE DSN
THRU 3.1.
* THIS RESULTS WHEN AN OUTPUT PDS FILLS UP ITS SPACE. IT ALSO
* HAPPENS WHEN THE PDS CANT ACQUIRE ITS 15 EXTENTS ON ONE VOLUME.
* A PDS CAN NOT SPAN MORE THAT ONE VOLUME.
SFFF PROBABLE CONTENTION - RESTART JOB
SF13 * A SUPERVISOR CAL (SVC) INSTRUCTION CONTAINED AN INVALID OPERAND
* OR THE SVC INSTRUCTION CALLED WAS NOT INCLUDED IN THE OPERATING
* SYSTEM. THIS OCCURS DURING OPEN PROCESSING. IT COULD BE A PDS
* MEMBER COULD NOT BE FOUND, OR CONFLICTING OR MISSING DCB PARMS.
* INVALID PARMS PASSED TO SUPERVISOR CALL ROUTINE.
SF22 * I/O TIME ESTIMATE EXCEEDED.
SF2D * OVERLAY SUPERVISOR - INVALID SUPERVISOR CALL
* BAD LOAD MODULE, RE-LINKEDIT MODULE.
SF37 * INPUT/OUTPUT ERR IN END-OF- VOLUME PROCESSING OR END-OF-VOLUME
* COULD NOT FIND A REQUIRED DATASET CONTROL BLOCK(DSCB). IT COULD
* BE NO DSCB COULD BE FOUND FOR A CONCATENATED DSN ON DASD, OR
* AN INVALID PARM WAS PASSED TO END-OF-VOLUME SVC (SVC 55). IT
* COULD ALSO BE AN I/O ERROR READING A FORMAT DSCB OR READING
* VOLUME LABEL ON THE SECOND VOLUME.
S001 - I/O ERROR
* WRONG LENGTH RECORD OR PHYSICAL BLOCK
* NO END OF FILE MARKER
* ATTEMPT TO READ RECORD AFTER END-OF-FILE CONDITION FOUND
* HARDWARE ERROR
* TRIED TO WRITE ON AN INPUT FILE
* INCORRECT USE OF BLOCK CONTAINS CLAUSE - COBOL
* SECONDARY SPACE TO SMALL- (LIKE SB37)
* TAPE BEING READ IN WRONG DENSITY
* TRTCH PARM WAS WRONG
* RECFM V IS INCOMPATIBLE WITH TRTCH ET
S001 * IF USING VSAM FILES IT COULD BE ONE OF THE FOLLOWING:
1) NO INVALID KEY CONDITION ON RANDOM PROCESSING.
2) KEY IS WRONG IN THE FD STATEMENT.
S001-1 WRONG RECORD LENGTH OR BLOCKSIZE.
S002 - RECORD LENGTH--ALSO CHECK FOR SQL CODE IN OUTPUT.
S002-OC FILE BLOCKED TOO LARGE, EXCEEDS TRACK CAPACITY.
* WRONG RECFM OR BLOCKSIZE IN JCL
S013 - CONFLICTING OR UNSUPPORTED PARAMETERS IN DCB
* BLOCKING IN PROGRAM=0; MUST HAVE BLOCKSIZE IN JCL.
* FILE LENGTH DIFFERENT THAN DEFINED IN PROGRAM
* MEMBER NAME SPECIFIED IN DD COULD NOT BE FOUND.
* NO BLKSIZE/DCB SPECIFIED FOR A DUMMY DD.
** WHEN EXECUTING IEBGENER WITH SYSUT1 IS DD DUMMY, FOLLOWED BY
SYSUT2 CREATING NEW DS, THE DCB INFORMATION MUST BE IDENTICAL.
* JCL - TRIED TO CREATE A PDS WITHOUT ALLOCATING DIRECTORY BLOCKS
S013-18 CANNOT FIND FILE, MAYBE EXECUTING WRONG PGM.
* CANNOT FIND FILE LARGE, EXCEEDS TRACK CAPACITY
S013-20 BLKSIZE NOT A MULTIPLE OF LRECL OR WRONG DSN.
S013-60 NEED 'FB' IN DCB (RECFM=FB)
S016 - SORT-X PGM; JCL DOES NOT CONTAIN SORT FIELDS
S031 - I/O ERROR UNDER - PHYSICAL DAMAGE TO RECORDING MEDIUM
INDEXED SEQUENTIAL - OUT OF SEQUENCE KEY WHEN LOADING AN
ACCESS (QISAM) ISAM DATA SET
- WRONG LENGTH RECORD OR BLOCK
S03A - INCREASE REGION
S03B - ERROR IN OPEN - DATA SET HAD NOT BEEN CREATED
PROCESS FOR AN - DATA CONTROL BLOCK HAD NOT BEEN CLOSED
INDEXED SEQUENTIAL AFTER DATA SET CREATED
DATA SET - ERROR IN LRECL OR BLKSIZE
S03D - ERROR IN OPEN - INDEXED SEQ ORGANIZATION NOT SPECIFIED
PROCESS FOR AN IN DSORG OF DCB, REQUIRED EVEN IF
INDEXED SEQUENTIAL SPECIFIED IN SOURCE PROGRAM
DIRECT DATA SET - NOT ALL VOL-SER NUMBERS SPECIFIED OR
INCORRECT SEQUENCE
S04E - CONTENTION WITH ANOTHER JOB. - - - WHEN THE JOB IS A DB2 IMAGE
COPY RESTART THE JOB FROM THE TOP ONLY WHEN THE MESSAGE AT THE
BOTTOM OF OUTPUT READS RESOURCES UNAVAILABLE....JOYCE DILVER....
S062 - RETURN CODE EQUAL TO OR GREATER THAN VALUE OF NULL ARGUMENT PRODUCED
S0B0 - I/O ERROR ON SYSTEM JOB QUEUE
S0C1 - OPERATION EXCEPTION
* A MISSING OR MISSPELLED DD.
* DATASET WAS OPEN OR CLOSED WHEN AN INPUT/OUTPUT INSTRUCTION
* WAS ISSUED FOR IT. IT SHOULD HAVE BEEN THE OPPOSITE.
* BAD LOAD MODULE OR OBJECT DECK.
* FORTRAN- MISSING DIMENSION STATEMENT, SAME NAME FOR ARRAY AND A
* SUBROUTINE.
* COBOL- USING SORT VERB, DDNAME WAS NOT SORTOUT WHEN THE GIVING
* OPTION WAS USED.
* COBOL- SUBROUTINE PROG ID WAS THE SAME AS THE ENTRY NAME.
* COBOL- TRIED TO CALL WITHIN COBOL F SORT I/O PROCEDURE.
* COBOL- TRIED TO CALL A SUBROUTINE WHICH COULDNT BE FOUND.
S0C2 - PRIVILEGED OPERATION EXCEPTION
* COBOL- MISSING PERIOD AT END OF PARAGRAPH OR PARAGRAPH NAMES.
* COBOL- MISSING GOBACK AFTER SORT VERB - LOGIC FELL INTO
* INPUT PROCEDURE.
* A MISSING OR MISSPELLED DD.
* DATASET WAS OPEN OR CLOSED WHEN AN INPUT/OUTPUT INSTRUCTION
WAS ISSUED FOR IT. IT SHOULD HAVE BEEN THE OPPOSITE.
S0C4 - PROTECTION EXCEPTION
* INDEXING (SUBSCRIPTING) OUTSIDE THE PGM'S ASSIGNED LIMITS.
* UNITIALIZED INDEX.
* A MISSING OR MISSPELLED DD.
* AN ATTEMPT TO READ AN UNOPEND INPUT FILE.
* BLOCKSIZE AND RECORD SIZE BEING SPECIFIED AS = FOR VARIABLE
LENGTH RECORDS
S0C5 - ADDRESSING EXCEPTION
* INDEXING (SUBSCRIPTING) OUTSIDE THE PGM'S ASSIGNED LIMITS.
* UNITIALIZED INDEX.
* A MISSING OR MISSPELLED DD.
* AN ATTEMPT TO CLOSE A DATASET A SECOND TIME.
* AN INPUT/OUTPUT INSTRUCTION TERMINATED BECAUSE OPEN WAS
UNABLE TO COPLETE THE DCB.
S0C6 - SPECIFICATION EXCEPTION
* AN ADDRESS DOES NOT SPECIFY THE BOUNDARY REQUIRED.
S0C7 - DATA EXCEPTION- DATA WAS OF INCORRECT FORMAT FOR THE INSTRUCTION
ATTEMPTING TO PROCESS IT.
* UNINITIALIZED INDEX OR SUBSCRIPT.
* FIELDS IN DECIMAL ARITHMETIC OVERLAP INCORRECTLY.
* INDEX/SUBSCRIPT VALUE INCORRECT AND INVALID DATA WAS REFERENCED.
* THE DECIMAL MULTIPLICAND HAS TOO MANY HIGH-ORDER SIGNIFICANT
DIGITS.
* DATA FIELD WAS NOT INITIALIZED, BLANKS WERE READ INTO A FIELD
DESIGNED TO BE PROCESSED WITH PACKED DECIMAL INSTRUCTIONS.
S0C8 - FIXED POINT OVERFLOW EXCEPTION
S0C9 - FIXED POINT DIVIDE EXCEPTION. INCREASING REGION TO 0M WORKED
FOR GARY STRAITZ ON A JOB HE WAS RUNNING.
S0CA - DECMIAL OVERFLOW EXCEPTION -
DESTINATION FIELD TOO SMALL FOR RESULT
S0CB - DECIMAL DIVIDE EXCEPTION, QUOTIENT EXCEEDS SPECIFIED DATA FIELD
SIZE.
S0CC - EXPONENT OVERFLOW EXCEPTION
S0CD - EXPONENT UNDERFLOW EXCEPTION
S0CE - SIGNIFICANCE EXCEPTION
S0CF - FLOATION POINT DIVIDE EXCEPTION DIVIDE BY ZERO
S0F1 -
S0F2 -
S0F3 -
S106 - PGM IS IN PGMLIB BUT POINTERS ARE BAD. HAVE PGMR COMPILE IT IN
TESTLIB AND PUT STEPLIB IN JCL TO PULL FROM TESTLIB.
S106 * ERROR WHILE LOADING MODULE INTO MAIN STORAGE/NEEDS MORE CORE
OR ADD REGION PARM TO JOB CARD
S117 -
S122 - OPERATOR CANCEL , REQUESTED DUMP
S137 - I/O ERROR ERROR IN LABEL PROCESSING
* MULTI-VOLUME DATASET WITH INCONSISTENT LABELING.
* NO TRAILER LABELS OR TAPE MARKS EXISTS AT END OF DATA.
* LABEL FORMAT INCORRECT.
S14F * CARD INPUT MISSING
S1E7 * DSN DOES NOT MATCH THE DSN ON THE VOLUME REQUESTED
S213 - DSCB NOT FOUND. I/O ERROR IN READING OR WRITING DSCB
(DSCB=DATA SET CONTROL BLOCK)
* THE FORMAT DSCB COULD NOT BE FOUND ON DASD.
* DISP=OLD OR SHR FOR AN OUTPUT DSN.
* SPACE PARM WAS NOT SPECIFIED.
* DISP=MOD BUT THE DATA SET SHOULD REALLY
BE NEW
* DISP=NEW AND UNIT AFFINITY REQUESTED
(UNIT=AFF=DDNAME) DEFERRED MOUNTING IS
IMPLIED AND NO SPACE IS ALLOCATED.
S214 - TAPE POSITIONING OR INVALID DISP
- HARDWARE DEVICE DIFFICULTIES
- BAD PHYSICAL SPOT ON RECORDING MEDIUM
- NO TAPEMARK FOLLOWING DATA
- DATA OBLITERATION
S222 - OPERATOR CANCELED
S228 - STORAGE VIOLATION - PROGRAM MIGHT HAVE BEEN COMPILED USING WRONG
RMODE, AMODE.
S237 - ERROR AT END OF VOLUME. S237-08 MAY BE CAUSED BY INTERNAL AND
EXTERNAL TAPE LABEL NOT MATCHING, TRY WHATTAPE ON TAPE NUMBERS
PRIOR AND RIGHT AFTER MISMATCHED TAPE.
* BLOCK COUNT WRONG ON TRAILER LABEL.
* VOL=SER SPECIFIED WRONG IN JCL.
* TAPE BLOCK COUNT DIDNT AGREE WITH DCB BLOCK COUNT, POSSIBLE
SKIPPED BLOCK DUE TO HARDWARE ERROR.
S306 - THIS CAN HAPPEN IF A MEMBER GETS REMOVED FROM CICS LOADLIB
SUCH AS CMSSGP.CICS.LOADLIB1 DAVE PADGETT CAN PUT THIS BACK
ON THE APF LIST WITH A RESOLV COMMAND. CAN ALSO BE A RACF ABEND.
(WILL SHOW MODULE XXXXXXXX NOT ACCESSED, USER UNAUTHORIZED.
S314 - I/O ERROR READING DSCB.
S322 - TIME OUT (CPU TIME LIMIT EXCEEDED), TRY ADDING TIME PARM
120 CPU MINUTES IS THE SYSTEM DEFAULT FOR EACH STEP IN A JOB.
S400 - INVALID CONTROL - INVALID DCB PARAMETER BLOCK
S413-08 I/O ERROR, RESTART JOB IN ABENDED STEP.
* THE VOLUME COULDNT BE MOUNTED ON THE REQUESTED DEVICE.
* THE VOLUME SERIAL # INCORRECT.
* THE VOLUME SERIAL # WASNT SPECIFIED FOR AN INPUT DSN
* VOLUME SEQUENCE # SPECIFIED IN CATLG OR JCL WAS GREATER THAN
THE # OF VOLUMES CURRENTLY ALLOCATED TO THE DSN.
S422 - JOB REQUIRED TOO MUCH SPACE IN SYSTEM JOB QUEUE.
S437 - ERROR OCCURRED AT END OF VOLUME
S428 - PSB AND REGION - IF PSB 'T' REGION = I003
INCOMPATIBLE - IF PSB 'P' REGION = I002
S513 - ERROR AT OPEN FOR TAPE DATA SET ON TAPE VOLUME.
* ASSIGNMENT OF TWO DATASETS TO THE SAME TAPE DEVICE.
S522 - TIME OUT (TASKS IN JOB STEP IN WAIT STATE DUE TO UNATTAINABLE
RESOURCE E.G, PHYSICAL DEVICE, DATA SET, CPU)
* PROGRAMMED TIMED OUT WAITING FOR TAPE MOUNT
S606 - NOT ENOUGH MAIN STORAGE WAS AVAILABLE TO LOAD PROGRAM
S60A * NEEDS MORE CORE
S613 - TAPE OR CARTRIDGE POSITION ERROR
* MISSING DCB .
* DENSITY IS WRONG.
* RECFM=F IN JCL WHEN FILE IS ACTUALLY FB
S637 - I/O ERROR DURING END-OF-VOL; SEE SPECIFIC RETURN CODES IN IEC026I BOOK.
* CONCATENATED DSNS HAVE UNLIKE ATTRIBUTES. I BOOK.
S706 - THE REQUESTED LOAD MODULE WAS MARKED BY THE LINKAGE EDITOR
AS NOT EXECUTABLE...
S713 - ERROR DURING OPEN DUE TO EXPIRATION DATE VIOLATION.
S714 - UNCORRECTABLE I/O ERROR OCCURRED IN TAPE LABEL PROCESSING (CRIMP
IN TAPE, TAPE LABEL DESTROYED OR WRITTEN INCORRECTLY).
S722 - TIMEOUT (OUTPUT LIMIT REACHED, JOB EXCEEDED NUMBER OF ALLOWABLE
LINES)
S737 - ERROR DURING END-OF VOLUME OR DURING ALLOCATION OF SECONDARY
DASD SPACE AS REQUESTED IN SPACE PARM OF DD, POSSIBLY NEEDS
MORE SPACE.
* CONCATENATED DSN CANT BE FOUND.
S755 - ENQUE FILE FULL - TOO MANY ENQUES (GET HOLD, ETC.)
S775 - NO THREADS - SYSTEM SHUTTING DOWN -TRY LATER
S80A - ERROR DURING GETMAIN - TRY INCREASING REGION PARM.
4096K OR 7M. 8M IS MAX BUT SHOULD EXERCISE CAUTION IN USING PER
JOHN SHULTZ. 0 USES WHATEVER'S NEEDED, LIKE A 1440 PARM.
S804 * NEEDS LARGER REGION SIZE.
S806 - REQUESTED MODULE NOT FOUND / PROGRAM PROBLEM
* MISSING STEPLIB OR JOBLIB CARD?
* OBJECT PROGRAM NOT FOUND
S813-04 TAPE MOUNTED DOES NOT HAVE DSN THAT THE JCL IS LOOKING FOR
(COULD BE 2 TAPES WITH THE SAME INTERNAL NUMBER)
S822 - REGION UNAVAILABLE (LIKE IN REGION=6M)
- SYSTEM ERROR IN INITIATOR U11STEP (USUALLY IN CHANGE ACCUMS);
REGION UNAVAILABLE, ERROR CODE=20 - TRY RESUBMITTING
S837 - VOLUME COUNT PARM INSUFFICIENT VOL=(,,,10) (LABEL=TAPE,VOL=(,,,99)
CAN SOMEONE EXPLAIN THE LABEL= TAPE PARM?????
S850 USER ABEND ISSUED BY IMS.
DATA BASE POINTER ERROR WHEN READING FROM A REGION NOT THE
UPDATING REGION.
CALL DBA. DATA BASE NEEDS TO BE DEALLOCATED AND REALLOCATED
S678 - NEEDS REGION PARM ADDED ON JOB CARD (REGION=7M)
S878 - VIRTUAL STORAGE REQUESTED NOT AVAILABLE. - TRY INCREASING REGION PARM.
4096K OR 7M. 8M IS MAX BUT SHOULD EXERCISE CAUTION IN USING PER
JOHN SHULTZ. 0 USES WHATEVER'S NEEDED, LIKE A 1440 PARM.
ADD REGION=4096K ON JOB CARD OR STEP.
S90A * TRYING TO CLOSE A CLOSED FILE OR OPEN AN OPENED FILE.
S913-38 ICH408I INSUFFICIENT AUTHORITY RACF
----------------------------------------------------------------------
RETCD - Return codes
----------------------------------------------------------------------
R/C 12 GENERIC ABEND, CHECK OUTPUT FOR SPECIFIC REASON, IE SB37,
CONTENTION.
R/C 12 DO A FIND ON SQL, IF SQLCODE=00000091J THIS IS A DEADLOCK AND
THE JOB SHOULD BE RESTARTED PER THE XT-42 INSTRUCTIONS
IF SQLCODE=00000090M CHECK WITH DATA BASE
ABOUT ENABLE UTILITY AFTER THAT RESTART JOB
PER XT-42
R/C 16 WHEN EXECUTING SYNCSORT,PARM='RC16=ABE' JOB WILL RETURN CODE 16.
MAX TO BOTTOM TO SEE IF ABEND IS EXPLAINED.
* IF JOB HAS THIS TYPE OF JCL - EXEC SORT,REGION=2M,PARM='CORE=
500K',CYL=50, AND JOB FAILS WITH RC16, INCREASE SORT SIZE BY
IN CYL=XX TO INCREASE THE SORT WORK SIZE. THERE WILL BE NO SORT
WORKS IN THE JCL ITSELF TO INCREASE SPACE.
----------------------------------------------------------------------
STACD - File status codes
----------------------------------------------------------------------
I/O STATUS '35' -
DDNAME MISSING (COBOL II).
I/O STATUS '37' -
CHECK FD RECORD LENGTH AGAINST DCB LENGTH (COBOL II).
I/O STATUS '39' -
CHECK BLOCK CONTAINS CLAUSE IN FD (COBOL II).
I/O STATUS '46'
READ PAST END OF DATA ON FILE (COBOL II).
I/O STATUS '47'
READ AFTER FILE CLOSED (COBOL II).
I/O STATUS '48' -
WRITING TO FILE OPENED AS INPUT.
FILE STATUS '92' -
1. ANY I/O REQUEST AGAINST A FILE THAT IS NOT OPEN.
2. ANY I/O REQUEST THAT IS NOT ALLOWED FOR THE OPTION THAT
WAS SPECIFIED WITH THE OPEN STATEMENT. (I.E. READ A FILE
OPENED AS AN OUTPUT OR REWRITE A FILE OPENED AS INPUT).
3. ANY WRITE OR REWRITE OF A RECORD WHOSE LENGTH IS GREATER
THAN THE MAXIMUM SIZE SPECIFIED IN THE FD (DCB).
4. ANY ATTEMPTED ACTION ON A FILE AFTER END-OF-FILE CONDITION
HAS OCCURED.
----------------------------------------------------------------------
SQLCD - SQL return codes
----------------------------------------------------------------------
NOTES:
* IN DB2 RELATED JOBS, DO A FIND ON SQL
SQL 100 - ROW NOT FOUND FOR FETCH--CONTACT PROGRAMMER, RETRY WON'T WORK.
-203 - A REFERENCE TO COLUMN colum-name is AMBIGUOUS
-204 - NAME IS UNDEFINED NANE
-205 - column-name IS NOT A COLUMN OF TABLE table-name
-501 - CURSOR IDENTIFIED IN FETCH OR CLOSE IS NOT OPEN
-502 - CURSOR IDENTIFIED IN OPEN IS ALREADY OPEN
-504 - THE CURSOR NAME cursor-name IS NOT DEFINED
-803 - INSERT/UPDATE VALUES INVALID; CONTACT SYS DEV
-805 - PROGRAM NOT FOUND; PROGRAM NOT BOUND AS PART OK PLAN NAME.
CONTACT SYS DEV.
91J - DEADLOCK, RESTART; LIKE -911.
90M - STOPPED UTILITY, UTILITY IS ACTIVE; CK. IF IMAGE COPIES ARE
RUNNING. RESTART AFTER IMAGE COPIES COMPLETE.
-904 - DB2-TABLE IS DOWN CONTACT SYSTEM DEV. (RESOURCE UNAVAILABLE)
OR CAN BE A TEMPORARY CONTENTION - RESTART LATER.
-911 - RESOURCE CONTENTION, RESTART AFTER JOB CAUSING CONTENTION ENDS
-913 - RESOURCE CONTENTION, RESTART AFTER JOB CAUSING CONTENTION ENDS
-04E - DATA PROBLEM OR DB2 INTERNAL ERROR
-818 - BIND PROBLEM, RELATED TO PRODUCTION UPDATES.
-923 - DB2 CONNECTION DOWN, CHECK STATUS OF DB2 PRODUCTION
-924 - DB2 CONNECTION INTERNAL ERROR = OPERATIONS CHECK SUBSYS DB2
CAF ERROR: DB2 CONNECTION LIMIT HAS BEEN REACHED = TOO MUCH RUNNING
IN DB2; RESTART AFTER ANOTHER DB2 JOB ENDS
----------------------------------------------------------------------
MISC - Miscellaneous codes and messages
----------------------------------------------------------------------
PATTERN DSCB NOT FOUND IN VTOC -IF GDG WITH DISP=NEW,CATLG,DELETE,
GDGMODEL MUST BE INCLUDED IN DCB= SUCH AS DCB=(GDGMODEL,RECFM=FB,ETC.
NO PRIMARY VOLUME AVAILABLE MSG - NO VOLUME'S AVAILABLE WITH ENOUGH
SPACE FOR RECALL.
NO STORAGE VOL - VOL=PRIV ASSUMED - UNABLE TO ALLOCATE -- CHECK JCL FOR
(SPGGRP,9); SPGGRP (OR OTHER ESOTERIC) MAY HAVE DECREASED NUMBER OF
VOLUMES. SPGGRP HAD BEEN DECREASED TO 8 CAUSING THIS JCLERR.
ALLOCATION FAILED DUE TO DATA FACILITY SYSTEM ERROR
IGD17273I ALLOCATION HAS FAILED FOR ALL VOLUMES SELECTED FOR DATA SET ..NAME
IGD17277I THERE ARE (XX) CANDIDATE VOLUMES OF WHICH XX ARE ENABLED OR QUIESCED..
THIS IS BASICALLY THE SAME AS SPACE REQUESTED NOT AVAILABLE. TRY
DECREASING SPACE ALLOCATION PER GENE WILL 02/10/91, AND LET JONES & CO
KNOW OF THIS SORT OF ABEND DURING WORK HOURS UNLESS UNABLE TO RESOLVE.
**UPDATE 06/15/91 - TO DD STATEMENT ADD STORCLAS=NONSMS, IE
UNIT=SYSDA,STORCLAS=NONSMS,SPACE=(ETC), THEN CHANGE/ADD USER=TTSVDMP,
PASSWORD=???????? TO JOB CARD TO RESTART PER JOHN SHULTZ.
01/11/92 - CHANGING TO UNIT=(SPGGRP,3) CAN WORK. KDF
03/21/92 - OR ADDING MORE SORTWORKS. KDF
----------------------------------------------------------------------
CICSCD - CICS abend codes
----------------------------------------------------------------------
ADCA - PSB MAY NOT BE IN SYNC WITH THE SOURCE PROGRAM
CHECK THAT THE DATABASE BEING CALLED IS REF-
ERENCED IN THE PSB.
AUEP - TIMEOUT. WHEN A PROGRAM READS A LOT OF DATA,
IT REACHES THE THRESHOLD LIMIT AND
ABENDS.
ADCC - HAVE SYSTEMS MANAGEMENT RECYCLE DBCTL IN THE
REGION THAT THE ABEND IS OCCURRING. IF THIS
FAILS THEN CALL TECH SUPPORT
ADLA - POSSIBLY DATABASE FULL, CALL DBA.
THIS IS A GENERAL IMS FILE REGION ABEND CODE.
PROGRAMMER CAN PULL DUMP USING CICS TRANS SP31
WHERE TASK=CSM5 / ABEND=ADLA / REGION=FILE REGION
REGISTER 1 WILL CONTAIN IMS ABEND CODE (IN HEX).
CORRESPONDING CICS AZI6 DUMP WILL TELL WHICH DATA BASE.
ADLC - PROGRAM TRIED TO ACCESS A DATABASE THAT IS
DISABLED.
ADLF - DL/I CALL MADE FOR A DATABASE, BUT THE LINK TO
THE SYSTEM ON WHICH IT RESIDES IS DOWN,
CALL DBA.
ADLG - ERRORS IN THE DL/I ARGUMENT LIST.
(VERIFY PCB IS SCHEDULED)
AEIP - CICS INVREQ CONDITION - IF USING LOGICAL PAGING
CHECK TO SEE IF A MAP W/O PAGING WAS SENT AFTER
ACCUM PAGING INITIATED.
AEIV - LENGERR - INVALID LENGTH ON SEND, RECEIVE, AND
OTHER VERBS
AEXT - DB2 NOT COMPILED WITH DL/I OPTION TURNED ON
AEY9 - DB2 HAS COME DOWN AND BACK UP BUT HAS NOT BEEN
RE-ATTACHED. TRY ATTACHING BY CODING:
IN CICS4 - "DSNC STRT 5"
AKCS - DEADLOCK TIMEOUT.
AICA - RUNAWAY TASK CONDITION, POSSIBLE LOOP.
APCT - REQUESTED MODULE CANNOT BE LOCATED IN THE PPT
OR ENTRY DISABLED (MODULE NOT FOUND IN THE
LOAD LIBRARY).
ASRA - USUALLY DATA EXCEPTION ERROR.
ATNI - CICS DECIDES IT NEEDS TO ABEND THE TRANSACTION.
COULD BE: INCORRECT DEFINITION IN TCT.
INVALID DATA STREAM FOR DEVICE TYPE.
AZI2 - TOO MANY DATABASE CALLS, NOT TAKING CHECKPOINT
(CHECK TO SEE IF IN LOOP WITH DL/I CALLS).
AZI4 - INTERREGION COMMUNICATION REQUEST CAN NOT BE
COMPLETED BECAUSE THE OTHER SYSTEM HAS BECOME
UNAVAILABLE.
AZI6 - TIME OUT, PROGRAM MAY BE IN A LOOP.
ISRT WITH SECONDARY INDEX THAT EXISTS RATHER
THAN AN 'II' STATUS CODE.
DATA BASE POINTER PROBLEM - INTER-REGION
READ. RELATED TO BUFFERS.
THIS IS A GENERAL ABEND CODE, OFTEN ACCOMPANIED
BY AN ADLA ABEND FOR THE FILE REGION (SEE ADLA).
1009 - COBOL 2 ABEND - WORKING STORAGE TOO LARGE, COB2
ALLOWS FOR VERY LARGE WS BUT CICS STILL LIMITS
AT 64K.
1011 - COBOL 2 ABEND - INDICATES USE OF ACCEPT,
DISPLAY, ETC. INVALID VERB.
APLC - SHARED LIBRARY FACILITIES ARE REQUIRED BY THE
PROGRAM, BUT WERE NOT INCLUDED IN THE CICS
SYSTEM DURING INITIALIZATION/INSTALLATION.
APLD - ERROR DURING TRANSMISSION OF A RECORD TO THE
CPLD QUEUE.
APLE - ERROR DURING PL1 PROGRAM MANAGEMENT (EQUAL TO
4000 NON CICS ABEND)
APLG - A GET STORAGE REQUEST TO THE STORAGE ALLOCATION
ROUTINE SPECIFIED A SIZE > THAN CICS/OS/VS
PERMITTED MAX (65,496) EITHER A BASED OR
CONTROLLED VARIABLE THAT IS TOO LARGE IN AN
ALLOCATE STMT, TOO MANY LARGE 'AUTOMATIC
VARIALBES.
APLI - ERROR DURING TRANSMISSION OF A RECORD TO THE
CPLI QUEUE.
APLM - NO MAIN PROCEDURE
APLS - TERMINATION IS CAUSED BY THE 'ERROR' CONDITION,
AND THE 'ERROR' CONDITION WAS NOT CAUSED BY
AN ABEND (OTHER THAN AN ASRA ABEND).
APLX - TOTAL POSSIBLE 'LIFO' STORAGE SEGMENTS HAVE
BEEN EXHAUSTED. CHECK PROGRAM FOR LOOPS OR
INCREASE THE 'ISASIZE' OR 'ISAINC'.
----------------------------------------------------------------------
IMSCD - IMS abend codes
----------------------------------------------------------------------
COMMOM ABENDS/REASONS
ABEND REASON
----- ------------------------------------------
S000 -
- 0260 TRYING TO CHKP WITHOUT PRIOR XRST
- 0261 PSB OUT OF SYNC WITH PROGRAM - NOT ENOUGH
GSAMS DEFINED IN PSB.
(IN I004BMP OR I003BMP MAKE SURE PROGRAM
IS COMPILED AS SHRBATCH NOT BATCH)
- 0428 PSB NEEDS TO BE DEFINED IN THE IMS REGION
- 0437 RACF ABEND ON A MESSAGE QUEUEING PROGRAM USING
A PSB NAME THAT MATCHES THE PROGRAM NAME.
(JCL MUST CONTAIN "AGN=AGPAMS4" ON THE EXEC CARD)
- 0456 PSB NEEDS TO BE RESTARTED AFTER PRIOR ABEND
OR PSB NOT FOUND
(FOR TEST CHECK DB15563P FOR TEST PSB JOB
THAT SHOULD RUN AT 10, 12, 2 AND 4)
- 0474 OPERATOR CANCEL
- 0476 PSB ERROR
- PROGRAM NOT COMPILED AS SHRBATCH
- REFERING TO -SC NOT -PCB IN CALL
- 0688 CTL PROGRAM NOT ACTIVE; CHECK IF EXECUTING
WRONG IMS (EX, I002BMP IN CLASS J)
- 0805 PSB NOT SCHEDULED/A DATA BASE IS NOT AVAILABLE
- 0811 BAD DATA BASE POINTERS - CONTACT DBA
- 0844 DATA BASE IS FULL
- 0849 CALL WITH 'GO' ON SEGMENT THAT HAS BEEN
PREVIOUSLY RETRIEVED BUT NOT COMMITED.
DATA INTEGRITY NOT INSURED.
- 0850 INTER-REGION DATA BASE BUFFER PROBLEM
- 3303 SIMILAR TO 0805.
DATA BASE OFFLINE IN IMS - DATA SHARING
DATA BASE MAY STILL BE AVAILABLE IN ONLINE
REGION.
3042 - RUNNING INVALID PROC IN JCL
(EXAMPLE TRYING TO EXECUTE DB2 IN PROC
THAT DOES NOT SUPPORT IT OR TRYING TO
EXECUTE BMP PROC FOR DB2)
3601 - LIB POINTED TO BY IMS DD COULD NOT OPEN
3602 - BLDL REQUEST FAILED FOR PSB
3603 - REQUESTED PSB COULD NOT BE LOADED
3604 - MISSING DDNAME ON GSAM FILE
3610 - LOOK AT YOUR RESTART
3611 - GSAM PSB IN USER LIST INVALID
3612 - ERROR DURING EXTENDED CHKPT CALL
3613 - ERROR DURING USER CALL TO GSAM DATABASE
3614 - ERROR DURING PURGING GSAM BUFFERS AT CHKPT
3620 - ERROR IN A RECURSIVE CALL TO CADDRPE
DURING EXTENDED RESTART
3707 - CICSXXX NOT AVAILABLE
CLASS NOT = J FOR TEST SHARE BATCH
CLASS NOT = K FOR PROD SHARE BATCH
- 0101 SAVEAREA TOO SMALL
- 0102 NO RESTART RECORD - DELETE CC505
3710 - ABEND WITH USER CODE, CHECK SPIE AREA
- 0001 PSB ERROR; WRONG PROC OR COMPILE
- 0004 ADDRESS EXCEPTION
- 0007 DATA EXCEPTION
3711 - CICS NOT UP
'KILLER' PROGRAM - NEED MORE CHKPTS
3714 - AXFN NO PROGRAM GEN OR TEST PSB
- ADLF CICS FILE REGION IS DOWN
- DFH2 POSSIBLE CHKPT QUEUE CONTENTION
- 775 ENQUE FILE FULL
- 828 INSERTING DUPLICATE SECONDARY INDEX
- ADLA/844 DATABASE FULL, CHECK SECONDARY INDEX
- 850 BAD DATA BASE POINTERS
- 852 BAD DATA BASE POINTERS
- 853 INDEX POINTER PROBLEM
- 913 INSUFFICIENT ACCESS
3717 - PCB NOT DEFINED IN PSB OR INVALID DLI
ARGUMENT LIST. CHECK 'LANG' PARM IN JCL
CHECK LANGUAGE PARAMETER IN CICS SHARED
BATCH PROC. REMEMBER DEFAULT IS PL/1.
3723 - 801 PSB NOT IN TABLES
- 803 PSB ALREADY SCHEDULED
- 805 PSB NOT IN ACBLIB OR DATA BASE OFFLINE
- 806 PROGRAM NOT IN TEST LOAD LIB. CHECK 'MBR='
AND RECOMPILE.
- 828 INSERTING DUPLICATE SECONDARY INDEX.
4036 - INVALID LANG PARM IN JCL - PROGRAM IS PL/I,
LANG PARM IS 'C'.
S322 - EXCEEDS TIME PARAMETER
S522 - OPERATOR DID NOT MOUNT TAPE ON TIME.
S722 - OUTLIM EXCEEDED
S878 - NEED TO INCREASE CORE.
S1320 - BLOW UP TAKING CHKPT, NEED MORE REGION
U0102 - RESTART FAILED BECAUSE IMS CANNOT FIND
RESTART INFO ASSOCIATED WITH CHECKPOINT ID.
CHECK FOR LOW-VALUES IN RESTART RECORD.
U0437 - APPLICATION GROUP NAME OR RESOURCES
SPECIFIED ARE NOT VALID
FOR DEPENDENT REGION
* MAY NEED 'AGN=' PARAMETER,
SEE MEMBER '#RACF'.
U0456 - PSB NEEDS TO BE RESTARTED - SCHEDULING
FOR TEST PSBS RUNNING IN IMS3 (USING PROC
I003BMP OR I003DB2), GET INTO DBAE IN TSO,
USE OPTION STARTPSB.
OR
PSB NOT NEW COPIED IN IMS
(FOR TEST CHECK DB15563P FOR TEST PSB JOB
THAT SHOULD RUN AT 10, 12, 2 AND 4)
U0688 - RUNNING 2 REGIONS IN 1 JOB.
U1904 - CHKPT UTILITY RECORD NOT CREATED
0C4 One of the following exceptions occurred:
4 Protection exception. The key of the storage area
that the running program tries to access is
different than that of the running program. The key
of the running program can be obtained from the PSW
key field. The key of the storage can be obtained
using the IPCS LIST subcommand. The programmer
should determine whether the program is running
with correct the key or whether the storage address
is set up correctly.
10 Segment-translation exception. This error can be
caused by either the segment table being paged out
with the program running disabled or the segment
table entry indicates that all of the storage
referenced by the entry is not allocated. If the
program is running disabled, the programmer should
determine whether the storage should be page fixed
prior to running disabled or whether the storage
address is set up correctly.
11 Page-translation exception. This error can be
caused by either the page table entry being paged
out with the program running disabled or the
referred storage area is not allocated. If the
program is running disabled, the programmer should
determine whether the storage should be page fixed
prior to running disabled, whether the storage area
is still obtained through a GETMAIN or whether the
storage address is set up correctly.
0C5 Addressing exception. The reason code is 5.
0C6 Specification exception. The reason code is 6.
0C7 Data exception. The reason code is 7.
0C8 Fixed-point-overflow exception. The reason code is 8.
0C9 Fixed-point-divide exception. The reason code is 9.
0CA Decimal-overflow exception. The reason code is A.
0CB Decimal-divide exception. The reason code is B.
0CC Exponent-overflow exception. The reason code is C.
0CD Exponent-underflow exception. The reason code is D.
0CE Significance exception. The reason code is E.
0CF Floating-point-divide exception. The reason code is F.
Source: Supervisor control
System Action: The system abnormally ends the task, unless a recovery
routine was provided to handle the interruption. The hardware action
is given in Principles of Operation.
System Programmer Response: Determine whether the problem program or
control program was in error.
If the problem program contained an error, correct it, and run the job
step again.
Note : In the jcl QMFBATCH one parameter i,e., DB2 cpu parameter is to be
supplied immediately after job card.
//jobparm sysaff=sysi
DB23 not operational :
Note : In the jcl QMFBATCH one parameter i,e., DB2 cpu parameter is to be
supplied immediately after job card.
//jobparm sysaff=sysi
sysi - production db2 cpu
sysg - test db2 cpu
____________________________